Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Westgate, FL
Window and door installation in Westgate, FL typically costs $650-$4,200 per opening depending on product tier, with full-home retrofits on mid-century CBS ranches running $12,000-$38,000. Most Westgate jobs require complete frame-out replacement of original jalousie and single-pane aluminum units before FBC-compliant products can be anchored into the masonry. Call (561) 354-3861 to schedule your free measured survey; the written quote we leave is the same document that governs the installation.
At Sightline, we measure every rough opening ourselves because Westgate’s 1950s-1970s housing stock was built before standardized window sizing. The corroded aluminum bucks and out-of-plumb frames we find in these CBS ranch homes aren’t surprises; they’re the starting point. Our Window Installation crews carry the full frame-out tools and masonry anchors these jobs demand, and every written scope includes the photo record you’ll receive at completion.
Why Westgate Homes Are Different
Westgate is a dense, unincorporated Palm Beach County community dominated by 1950s-1970s CBS ranch homes whose original jalousie and single-pane aluminum windows meet none of Florida’s current wind-load or energy-code standards. The defining local story is insurance-driven replacement: Palm Beach County carriers are actively non-renewing policies on homes without FBC-compliant impact windows and doors, making Westgate’s aging housing stock a prime market for full-opening retrofits.
The community is built almost entirely of mid-century CBS ranch homes with varied, non-standardized rough openings from an era before uniform window sizing. Installers routinely encounter corroded or out-of-plumb original frames and aluminum bucks that require full frame-out replacement before new impact units can be properly set and anchored into the masonry. Because Westgate is unincorporated, every permit routes through Palm Beach County’s building department rather than any municipal office, a process with its own inspection cadence that requires contractors to be current on county-specific submittal requirements.
Westgate falls within Palm Beach County’s high wind-speed design zone under the Florida Building Code but sits outside the Miami-Dade/Broward HVHZ, so impact products must meet FBC wind-load requirements without necessarily needing the more restrictive HVHZ Notice of Acceptance. Year-round high humidity and intense UV accelerate vinyl and aluminum frame degradation on the west-facing rear elevations common in east-west oriented Westgate lots.
Our Main Westgate Services
Westgate homeowners call us most often for full-opening retrofits that satisfy insurance requirements and for patio door upgrades that address the home’s original single-point egress limitations.
Window Replacement in Westgate
Window replacement in Westgate means removing jalousie and single-pane aluminum units from CBS masonry openings, treating corroded bucks, and installing FBC-compliant impact or energy-efficient windows with proper masonry anchorage. We document every frame condition with photos the customer keeps, and the measured survey governs the written quote. Window Replacement in Westgate is our most called-for service in this zip code.
Impact Windows & Doors in Westgate
Impact windows and doors in Westgate are increasingly driven by insurance non-renewal notices on homes with original non-compliant glazing. We specify products that carry the FBC wind-load rating for Palm Beach County without the unnecessary cost of HVHZ NOA certification, and we pull Palm Beach County permits for every job. Impact Windows & Doors in Westgate includes full documentation of product labels and test reports.
Sliding & Patio Doors in Westgate
Sliding and patio door installation in Westgate addresses the original 6-foot single sliders common in 1960s-1970s ranch plans, upgrading to 8-foot or 12-foot multi-panel systems with impact-rated glazing and proper sill pan drainage. We measure the rough opening, note any stucco return conditions, and specify the header reinforcement required in the written scope before work begins. Sliding & Patio Doors in Westgate includes the photo record of sill pan and flashing installation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Westgate
Window installation in Westgate begins with the reality of mid-century CBS construction: non-standard rough openings, corroded aluminum bucks embedded in stucco, and original jalousie hardware that has seized in place. We measure every opening ourselves, document frame conditions with photos, and write the scope before any product is ordered. Our Window Installation process was built for exactly this housing stock.
Single & Double Hung Windows
Signs you need it
Original jalousie windows that no longer seal, single-pane aluminum frames with visible corrosion at the weep holes, or sashes that won’t stay open without a prop stick.
What it costs in Westgate
Single and double hung window installation in Westgate typically runs $850-$2,400 per opening for vinyl impact-rated units, with full frame-out replacement of corroded bucks adding $180-$340 per opening.
How we do it
We remove the existing frame and buck down to the masonry, install new pressure-treated bucks plumb and square, flash the sill pan, set the new unit with masonry anchors at 16 inches on center, and foam-seal before reinstalling stucco return.
Horizontal Roller Windows
Signs you need it
Sliding sashes that jump the track, rollers ground flat from grit intrusion, or frames that leak during Westgate’s summer downpours despite new weatherstripping.
What it costs in Westgate
Horizontal roller window installation in Westgate typically runs $920-$2,650 per opening for impact-rated vinyl, with oversize rollers and stainless steel track upgrades at the upper end of the range.
How we do it
We measure the daylight opening and the frame depth, specify the roller count and track gauge for the sash weight, install with integrated sill pan and end dams, and test operation under load before sealing.
What Window Installation Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Single/Double Hung (vinyl impact) | $850-$2,400 per opening |
| Horizontal Roller (vinyl impact) | $920-$2,650 per opening |
| Full frame-out with buck replacement | $180-$340 per opening |
How long does window installation take in Westgate?
A typical Westgate ranch with 12-14 openings takes 2-3 days for full frame-out and replacement, plus Palm Beach County inspection scheduling. Call (561) 354-3861 for a measured survey and written timeline.
Will my stucco be damaged during window replacement?
We cut stucco returns with masonry blades and reinstall matching stucco after frame setting; the written scope notes any stucco repair included. Call (561) 354-3861 to review the photo documentation process.
Door Installation in Westgate
Door installation in Westgate addresses the original hollow-core entry doors and uninsulated steel patio units common in 1960s-1970s CBS ranches, upgrading to FBC-compliant impact-rated systems with proper sill pan and jamb anchorage. We measure the rough opening, note any out-of-square conditions in the masonry, and specify header reinforcement in the written scope before work begins. Our Door Installation crews carry the masonry anchors and pressure-treated bucks these retrofits require.
Hurricane-Proof Front & Entry Doors
Signs you need it
Insurance non-renewal notice citing non-compliant entry door, original door with no impact-rated label, or visible daylight around the jamb after deadbolt engagement.
What it costs in Westgate
Hurricane-proof front door installation in Westgate typically runs $2,800-$6,500 including FBC-rated slab, impact glass lite, reinforced jamb, and multi-point lock hardware.
How we do it
We remove the existing unit and buck, install pressure-treated bucks plumb in the masonry opening, set the pre-hung impact door with masonry anchors, integrate the sill pan with end dams, and test the multi-point lock engagement before sealing.
French & Double Doors
Signs you need it
Original sliding glass door with failed rollers, single-point latch that flexes the inactive panel, or desire for full opening width without the sash stack of a slider.
What it costs in Westgate
French and double door installation in Westgate typically runs $3,200-$7,800 for impact-rated vinyl or aluminum systems, with adjustable hinges and multi-point hardware at the upper end.
How we do it
We verify header capacity for the doubled dead load, install the frame with integrated sill pan, hang active and inactive panels with adjustable hinges, adjust the multi-point lock for even engagement, and document operation with photos.
What Door Installation Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Hurricane-Proof Front & Entry Door | $2,800-$6,500 per door |
| French & Double Doors | $3,200-$7,800 per pair |
| Frame-out and buck replacement | $220-$380 per opening |
Do I need a permit to replace my front door in Westgate?
Yes, all door replacements in unincorporated Westgate require a Palm Beach County permit; we pull it and schedule inspection. Call (561) 354-3861 and we’ll include permit costs in the written quote.
Can I keep my existing door size or do I need to reframe?
Most Westgate homes accept standard 36-inch entry and 72-inch patio sizes in the existing rough opening; we verify with field measurements before ordering. Call (561) 354-3861 to schedule the measured survey.
Energy-Efficient Windows in Westgate
Energy-efficient windows in Westgate address the single-pane aluminum and original jalousie units that drive cooling loads upward in homes with west-facing rear elevations exposed to intense afternoon UV. We specify products by U-factor and SHGC values matched to Palm Beach County’s cooling-dominated climate, not by brand margin. Our Energy-Efficient Windows quotes include the performance documentation your utility rebate program may require.
Low-E & Argon Gas Glass
Signs you need it
West-facing rooms that exceed 78 degrees by 3 PM despite AC running, faded upholstery near original clear-glass windows, or condensation between failed single-pane sashes.
What it costs in Westgate
Low-E with argon gas upgrade in Westgate typically adds $80-$140 per opening above standard impact glass, with soft-coat Low-E at the upper end for maximum SHGC reduction.
How we do it
We specify the coating position and gas fill based on orientation, order insulated glass units from the manufacturer with documented performance labels, and verify the spacer type and seal date before installation.
ENERGY STAR Replacement Windows
Signs you need it
FPL bill exceeding $280 monthly for a 1,400-square-foot Westgate ranch, or original windows with no performance rating label visible on the glass edge.
What it costs in Westgate
ENERGY STAR certified window installation in Westgate typically runs $980-$2,850 per opening for vinyl impact-rated systems meeting the South Climate Zone criteria.
How we do it
We verify the product’s NFRC label against ENERGY STAR South zone requirements, document the U-factor and SHGC in the written scope, install with complete air sealing, and leave the performance documentation with the customer.
What Energy-Efficient Windows Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Low-E & Argon Gas upgrade | +$80-$140 per opening |
| ENERGY STAR Certified Window | $980-$2,850 per opening |
| Full-home retrofit (12-14 openings) | $14,000-$34,000 |
Will energy-efficient windows lower my FPL bill in Westgate?
Most Westgate homeowners see 15-25% cooling reduction after full retrofit of single-pane aluminum, with west-facing elevations showing the largest improvement. Call (561) 354-3861 for a measured survey and written performance estimate.
What’s the difference between Low-E hard coat and soft coat?
Soft-coat Low-E offers lower U-factor and SHGC for Westgate’s cooling load but requires insulated glass; hard-coat is tougher for single-pane retrofits but less efficient. Call (561) 354-3861 and we’ll specify based on your orientation and budget.
Impact Garage Doors in Westgate
Impact garage doors in Westgate are increasingly required by carriers non-renewing policies on homes with non-compliant garage openings, which count as the largest unprotected breach in most CBS ranch plans. We specify wind-load-rated sectional or roll-up systems with impact-rated glazing or solid construction, engineered to FBC requirements for Palm Beach County without unnecessary HVHZ cost. Our Impact Garage Doors quotes include the structural attachment detail for the written scope.
Hurricane-Rated Garage Doors
Signs you need it
Insurance notice citing non-compliant garage door, original thin-gauge steel door with no wind-load sticker, or visible bowing during afternoon sea breeze gusts.
What it costs in Westgate
Hurricane-rated garage door installation in Westgate typically runs $2,400-$5,800 for a 16-foot sectional with impact-rated windows or solid construction, including reinforced track and spring system.
How we do it
We measure the finished opening and headroom, specify the door and track for the FBC wind-load zone, install with engineered jamb brackets and strut reinforcement, and test the automatic opener safety reverse under load.
Wind-Load Code Compliance
Signs you need it
Permit application rejected for non-compliant garage door, home sale inspection flagging the garage opening, or addition of living space above the garage requiring upgraded load path.
What it costs in Westgate
Wind-load code compliance upgrade in Westgate typically runs $1,800-$4,200 for structural reinforcement of existing door and track, or $2,400-$5,800 for full replacement with rated system.
How we do it
We review the FBC wind-load map for the specific Westgate address, specify the door and hardware to meet or exceed the design pressure, install with documented attachment details, and leave the product label photo with the customer.
What Impact Garage Doors Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Hurricane-Rated Garage Door (16′) | $2,400-$5,800 |
| Wind-Load Compliance Upgrade | $1,800-$4,200 |
| Reinforced track and spring system | $380-$620 |
Does my garage door need to be impact-rated if it has no windows?
Solid garage doors still require FBC wind-load rating for the opening size and location; impact rating applies to glazed sections, but wind-load compliance is mandatory. Call (561) 354-3861 for a written specification based on your door size.
Will an impact garage door work with my existing opener?
Most hurricane-rated doors weigh more and require opener recalibration or upgrade; we test the spring balance and specify opener compatibility in the written scope. Call (561) 354-3861 to include opener evaluation in the measured survey.
Custom & Geometric Windows in Westgate
Custom and geometric windows in Westgate address the non-standard rough openings and architect-original shapes found in 1960s-1970s ranch variations, where off-the-shelf units won’t fit the existing masonry without visible infill or reduced glass area. We field-measure every radius, chord, and angle, then specify from manufacturer lines tooled for custom impact and energy-efficient fabrication. Our Custom & Geometric Windows quotes include the full-size template approval before production release.
Geometric & Shaped Windows
Signs you need it
Original trapezoid, triangle, or octagon window with failed seal and no standard replacement available, or desire to match existing geometric pattern in an addition.
What it costs in Westgate
Geometric and shaped window installation in Westgate typically runs $1,400-$4,200 per opening for custom impact-rated vinyl or aluminum, with template and fabrication lead time of 4-6 weeks.
How we do it
We create a full-size field template of the existing opening, submit it for CAD verification, have the customer approve the shop drawing, then fabricate with impact-rated glazing and install with custom bucks milled to the masonry condition.
Arched & Curved Windows
Signs you need it
Original ranch with segmental arch over the entry or living room, curved top sash with rotted wood buck, or arched retrofit to replace rectangular unit in a gable end.
What it costs in Westgate
Arched and curved window installation in Westgate typically runs $2,200-$5,800 per opening for custom radius-top impact units, with radius templates and steel-reinforced frame options at the upper end.
How we do it
We measure the spring line and rise with a flexible template, verify the radius against manufacturer tooling, submit for engineering review if the span exceeds 48 inches, and install with curved sill pan integrated to the straight-leg sections.
What Custom & Geometric Windows Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Geometric & Shaped Window | $1,400-$4,200 per opening |
| Arched & Curved Window | $2,200-$5,800 per opening |
| Template and CAD verification | $180-$280 (included in quote) |
How long does custom window fabrication take?
Custom geometric windows typically require 4-6 weeks from template approval to delivery, plus Palm Beach County permit and inspection time; we coordinate permit pull with fabrication. Call (561) 354-3861 to start the template and written timeline.
Can you match my existing stucco arch to a new window shape?
We template the existing stucco return and specify the window frame to maintain or improve the reveal; stucco repair is noted in the written scope. Call (561) 354-3861 for field measurement and photo documentation.
Brands We Service in Westgate
We specify from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - selected by what the opening requires, not by what is in stock. Common hardware, balances, and weatherstripping for Therma-Tru and ViewLux entry systems are stocked locally for Westgate service calls. Most parts orders arrive within 48 hours; full unit lead times vary by manufacturer and are noted in the written quote. See our brands for performance tier details.
Pricing for Windows & Doors in Westgate, FL
| Service | Typical range in Westgate |
|---|---|
| Single/Double Hung Window (impact vinyl) | $850-$2,400 per opening |
| Horizontal Roller Window (impact vinyl) | $920-$2,650 per opening |
| Frame-out with buck replacement | $180-$340 per opening |
| Hurricane-Proof Front Door | $2,800-$6,500 per door |
| French & Double Doors | $3,200-$7,800 per pair |
| Door frame-out and buck replacement | $220-$380 per opening |
| Low-E & Argon upgrade | +$80-$140 per opening |
| ENERGY STAR Certified Window | $980-$2,850 per opening |
| Hurricane-Rated Garage Door (16′) | $2,400-$5,800 |
| Wind-Load Compliance Upgrade | $1,800-$4,200 |
| Geometric & Shaped Window | $1,400-$4,200 per opening |
| Arched & Curved Window | $2,200-$5,800 per opening |
Prices in Westgate push higher when full frame-out is required due to corroded aluminum bucks, when header reinforcement is needed for larger openings, or when custom fabrication templates are required. The written quote you receive before any work starts is the same document that governs the final invoice; Haven Clause 1 permits no change orders without a new written scope.
Neighborhoods We Serve in Westgate
We serve the full Westgate community and surrounding unincorporated Palm Beach County areas from our Miami (South FL) office, with crews dispatched locally to Westgate addresses. Typical response for measured survey scheduling is 2-4 business days.
- Westgate Heights
- Westgate Manor
- Westgate Estates
- Westgate Park
- Westgate Pines
Service Area - Cities Near Westgate
We install and replace windows and doors throughout the Palm Beach County corridor, with measured survey and installation crews serving West Palm Beach, FL, Lake Park, FL, North Palm Beach, FL, and Royal Palm Beach, FL from the same dispatch. Permit coordination varies by municipality; unincorporated Westgate routes through Palm Beach County, while incorporated cities maintain their own inspection schedules.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Westgate
Palm Beach County building department typically reviews window and door permits in 5-10 business days for standard replacements, with inspection availability 2-5 days after rough-in or final completion. We pull the permit and coordinate inspection as part of every written scope; the customer receives the approved permit card and inspection sign-offs.
No, Westgate sits outside the Miami-Dade/Broward High-Velocity Hurricane Zone, so FBC-rated impact products for Palm Beach County’s wind-speed zone are sufficient and typically cost 10-20% less than HVHZ NOA-certified equivalents. We specify the correct rating in the written quote; the product label documentation is included in the job record.
Yes, our live phone coverage accepts texts at (561) 354-3861 and responds during business hours; after-hours texts are queued for morning reply. The measured survey must be scheduled by phone to confirm access and duration, but initial questions and photo sharing work well by text.
Call (561) 354-3861 to schedule your free measured survey. The written quote we leave is the same document that governs the installation, backed by the 365-Day Done Right Promise and the Haven Standard that has governed every one of our 18,000+ openings since 2012.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Westgate Customers Say
"Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H.