Sliding & Patio Doors in West Palm Beach - Free Measure, Exact Written Quote

Trusted Sliding & Patio Doors for West Palm Beach Homeowners

Our Sliding & Patio Doors in West Palm Beach installation and replacement typically runs $2,800-$8,500 for a complete unit, depending on size, impact rating, and frame material, with most measured surveys scheduled within 48 hours. At Sightline Windows & Doors, we’ve installed and replaced more than 18,000 openings since 2012, every one with a written price before work started and a documented photo record when the job finished. Our technicians are background-checked, uniformed, and identified by license number before arrival, operating under the Haven Standard that governs every engagement. Call (561) 354-3861 to schedule your measured survey. The quote you receive is the document we work from; no change orders, no surprises.

Call (561) 354-3861

West Palm Beach’s exposure to salt air, hurricane-force winds, and the seasonal deluge from June through November means sliding and patio doors here face conditions that inland markets don’t. We’ve measured openings in El Cid where original aluminum frames have corroded at the sill, and in Flamingo Park where 1990s-era non-impact glass no longer meets current Florida Building Code for the High-Velocity Hurricane Zone. The work we specify depends on what the opening requires, not what we have in stock. That is Haven Clause 1: Have it in writing. The measurement and the quote are the same document.

What Our Sliding & Patio Doors Service Includes

Patio Doors

A patio door is any exterior door system that opens onto a deck, pool enclosure, or backyard space in West Palm Beach, typically a single swinging door or a pair of French doors with full glass panels. You need a new patio door when the frame has warped, the weatherstripping has failed and you’re tracking sand into the house, or the threshold has settled and the door drags. At Sightline Windows & Doors West Palm Beach, we measure the rough opening with a laser level and digital caliper, specify the correct jamb width for your wall construction, and provide a written scope that includes the product, the installation method, and the final price before any work begins.

Impact Sliding Glass Doors

Impact sliding glass doors combine laminated glass, reinforced frames, and multi-point locking hardware to meet Miami-Dade and Florida Building Code requirements for wind-borne debris protection. You need an impact-rated unit if your home is in the HVHZ, if your insurance carrier requires it, or if you’re replacing any door within three feet of property line. We specify impact sliding glass doors from CWS, ES Windows, and ECO Window Systems, selected by performance tier and price range, not by margin. Every impact door we install carries a Florida Product Approval number, and we pull the permit and schedule the inspection as part of the written scope.

Sliding Glass Door Replacement

Sliding glass door replacement removes the complete unit, frame, sill, and hardware, and installs a new system engineered for the exact rough opening. You need replacement rather than repair when the rollers have worn flat tracks into the sill, when the frame has rusted through at the weep holes, or when the insulated glass unit has failed and you see permanent fog between the panes. Our replacement process in West Palm Beach includes a documented photo record of the existing condition, the measured survey you keep, and the final photo record showing the completed installation with level, plumb, and seal verification.

Impact French Patio Doors

Impact French patio doors are hinged pairs with full glass panels, impact-rated for the HVHZ, that swing inward or outward from a central jamb. You need impact French doors when you want the traditional divided-light aesthetic with code-compliant protection, or when you’re converting a window opening to door access for a new pool deck. We stock and install impact French patio doors from Therma-Tru and ViewLux, with adjustable hinges and multi-point deadbolt systems that we torque to manufacturer specification. The written scope specifies the swing direction, the hardware finish, and the exact glass package before any material is ordered.

Screen Door Installation

Screen door installation adds a sliding or retractable mesh panel to your patio door system for ventilation without insect intrusion. You need a screen door when the original has torn at the corners, when the frame has bent and no longer tracks straight, or when you’re installing a new patio door and want the complete system. We measure the daylight opening to 1/16 inch and specify screen frames from Mr-Glass and CWS with fiberglass or pet-resistant mesh options. The screen door is included in the written scope with the same fixed pricing as the primary door; no add-on at installation.

Brands We Service for Sliding & Patio Doors

We service and install sliding and patio door systems from eight verified manufacturer lines, specified by what the opening requires, not by what is in stock. For impact-rated aluminum and vinyl sliding doors in West Palm Beach, we regularly specify CWS and ES Windows, both Florida-manufactured lines with HVHZ approvals and U-factors as low as 0.30 for energy compliance. We’ve installed hundreds of CWS Sliding & Patio Doors in North Palm Beach and homes from Northwood to Southland Park, and we stock their OEM roller assemblies and sill caps for service calls. ECO Window Systems provides a mid-tier price point with Miami-Dade approval and a 10-year insulated glass warranty we document in every written scope. For screen and standard patio door applications, Mr-Glass and CWS both offer extruded aluminum frames with stainless steel fasteners rated for salt-air exposure.

Whether you have CWS, ES Windows, ECO Window Systems, Mr-Glass, or any other make, we can help. Our technicians carry digital catalogs for PGT, CGI, Therma-Tru, and ViewLux as well, and we service existing units from manufacturers no longer in production. The measured survey identifies the brand, the age, and the specific failure; the written scope specifies the repair or replacement without reference to what we prefer to sell. That is Haven Clause 5: No surprises.

Before

After

Signs You Need Sliding & Patio Doors Right Now

• The door requires both hands to move or makes a grinding sound on the track. Worn rollers and damaged tracks are progressive failures; the door will eventually jam completely, and the force required to move it stresses the frame and lock hardware. In West Palm Beach’s salt air, aluminum oxide builds on exposed roller axles and accelerates the wear. We replace the roller carriage and track as a matched set, documented in the photo record.
• You feel air movement or see daylight at the door’s perimeter when it’s closed. Failed weatherstripping and settled thresholds compromise the thermal envelope and allow wind-driven rain intrusion during summer storms. In the HVHZ, that gap is also a pressure equalization risk during hurricane conditions. Our measured survey includes a smoke-pencil test to identify every leak path before the scope is written.
• The glass shows permanent fog, condensation between panes, or a milky haze. These symptoms indicate seal failure in the insulated glass unit, which means the low-E coating and argon fill are compromised. In West Palm Beach’s intense UV exposure, failed IGUs also transfer more heat and force your AC system to compensate. We specify replacement IGUs or complete door units based on frame condition and age.
• The lock mechanism is loose, the key sticks, or the multi-point bolts don’t fully engage. Lock hardware failure is a security vulnerability and, for impact-rated doors, a code compliance issue because the three-point lock system is part of the wind-borne debris protection. We disassemble, inspect, and replace hardware with OEM or upgraded components, torqued to manufacturer specification and tested before we leave.
• The frame shows corrosion, pitting, or white powder at the sill and jambs. Aluminum oxidation in salt air begins at the weep holes and sill nose, where standing water collects. Once pitting penetrates the anodized layer, the frame loses structural integrity and will not support impact-rated glass in a design-pressure event. We document frame corrosion with dated photos and specify replacement when the wall thickness has reduced below manufacturer minimum.

Our Sliding & Patio Doors Process - Step by Step

1. 1
   Schedule the measured survey. Call (561) 354-3861 and a live person answers, 24/7. We schedule a 90-minute arrival window at your West Palm Beach home. The technician who arrives is the technician on the record, background-checked and uniformed with license number visible, per Haven Clause 3: Verified Crews.
2. 2
   Measured survey and condition documentation. We laser-measure the rough opening in three places for width, height, and squareness, record the existing product brand and age, and photograph the frame condition, hardware, and any damage. You receive a copy of the measured survey to keep. This document and the written quote are the same; the price cannot differ.
3. 3
   Written scope and product specification. Within 24 hours, you receive a written scope that specifies the product by manufacturer, model, size, glass package, hardware finish, and installation method. The price is line-itemed: product, labor, permit, disposal, and any optional upgrades. Haven Clause 1 means this price is fixed before any work starts.
4. 4
   Permit, installation, and real-time documentation. We pull the permit, schedule the inspection, and install on the date specified in the scope. The crew documents each phase with dated photos: existing removal, rough opening preparation, flashing and sealant application, unit installation, and final hardware adjustment. You receive the complete photo record within 48 hours of completion.
5. 5
   Final inspection and 365-Day Done Right Promise. The municipal inspector verifies code compliance; we attend and address any correction items immediately. The job closes with the documented photo record, the paid invoice matching the written scope to the cent, and the 365-Day Done Right Promise stamped on every document. If it’s not done right, we make it right. That is the Haven Standard.

How Much Does Sliding & Patio Doors Cost in West Palm Beach?

Sliding & Patio Doors Near West Palm Beach - Our Service Area

We install and replace sliding and patio doors across Palm Beach County and into northern Broward, with measured surveys typically scheduled within 48 hours in West Palm Beach, Sliding & Patio Doors in Westgate, and Sliding & Patio Doors in Lake Park. Response times to North Palm Beach, Royal Palm Beach, and Palm Beach Gardens average the same two-day window; for Palm Beach, Palm Springs, Greenacres, The Acreage, Lake Worth, and Wellington, we typically schedule within 72 hours. Our technicians live in the communities they serve, which means they understand the local permitting requirements, the specific wind-zone design pressures, and the salt-air conditions that affect product specification. Whether you’re in the historic district near the Intracoastal or in a newer development west of the Turnpike, the Haven Standard applies identically: the measurement and the quote are the same document.

Frequently Asked Questions - Sliding & Patio Doors in West Palm Beach

Schedule Your Sliding & Patio Doors Service in West Palm Beach Today

Call (561) 354-3861 to schedule your free measured survey. A live person answers, 24/7. You’ll receive a written scope with a fixed price before any work starts, a background-checked and uniformed technician identified by license number, and a documented photo record when the job is done. The 365-Day Done Right Promise covers every installation. No change orders, no surprises, no call for a quote. The measurement and the quote are the same document.

Written by Sonia Raman, Owner at Sightline Windows & Doors, serving West Palm Beach since 2012.