Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in West Palm Beach, FL
Window and door installation in West Palm Beach runs $650-$4,200 per opening depending on product tier, with most whole-home retrofits in the $8,500-$28,000 range. We measure every opening to the sixteenth, write the price on that survey, and the number does not change. Call (561) 354-3861 to schedule your free measured survey. Our crews serve West Palm Beach from the brand’s South Florida scheduling office, carrying Florida Product Approval documentation for every product we specify.
Why West Palm Beach Homes Are Different
West Palm Beach sits just outside the High-Velocity Hurricane Zone that governs Miami-Dade and Broward, so our installations require Florida Product Approvals rather than the stricter Miami-Dade NOA certification. Yet coastal Palm Beach County still mandates impact-rated openings under Florida Building Code wind-speed maps reaching 140-plus mph design loads. The county line at the HVHZ boundary is one of the most commonly misunderstood permit triggers in the regional window trade, and we have seen contractors from both directions pull the wrong documentation.
Meanwhile, the city’s dense concentration of historic districts, Flamingo Park, El Cid, and Grandview Heights, means many impact-window jobs must also clear the Historic Preservation Board. That board restricts frame profiles, muntin patterns, and finishes on 1920s-1940s Mediterranean Revival homes, a dual-compliance burden almost no neighboring market faces at the same scale. The older residential core is dominated by those same Mediterranean Revival and Mission-style concrete block homes, many still fitted with original steel-framed or jalousie windows that carry zero hurricane rating. Mid-century CBS tract construction fills the surrounding neighborhoods, where aluminum single-pane sliding doors and jalousie panels remain common retrofit targets.
The Intracoastal Waterway bisects the city and the Atlantic shoreline sits only miles east, bathing even inland West Palm Beach neighborhoods in salt-laden air that aggressively corrodes aluminum frames, steel hardware, and exposed fasteners. Proper marine-grade finishes and stainless hardware are not upgrades here. They are baseline specifications.
Our Main West Palm Beach Services
West Palm Beach homeowners call us most often for full window replacement and impact-rated protection. Here is what those jobs involve locally.
Window Replacement in West Palm Beach
We replace original steel-framed and jalousie windows throughout the historic districts and mid-century tracts alike, specifying Florida Product Approved impact units that clear both the building department and, where required, the Historic Preservation Board. The measured survey documents existing frame conditions, sightline dimensions, and any rot in the CBS openings. Window Replacement in West Palm Beach is priced from that single document.
Impact Windows & Doors in West Palm Beach
Every product we specify for West Palm Beach carries Florida Product Approval for the 140-plus mph design loads mapped to coastal Palm Beach County. We do not over-specify Miami-Dade NOA products where they are not required, and we do not under-specify where impact rating is mandatory. The written quote names the exact approval number and design pressure rating. Impact Windows & Doors in West Palm Beach begins with that documentation.
Sliding & Patio Doors in West Palm Beach
Aluminum single-pane sliding doors from the 1960s-1980s CBS construction are a primary retrofit category in West Palm Beach. Salt corrosion on the bottom tracks and failed rollers are the usual failure modes. We measure the rough opening, specify a replacement from PGT, CGI, or CWS with stainless rollers and marine-grade track, and write the price before ordering. Sliding & Patio Doors in West Palm Beach is documented with a photo record of the existing unit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in West Palm Beach
Most window installation in West Palm Beach involves removing original steel-framed or jalousie units from 1920s-1940s Mediterranean Revival homes and mid-century CBS construction, then fitting Florida Product Approved replacements that meet current wind-load requirements without triggering unnecessary Miami-Dade NOA costs. Salt air corrosion on existing aluminum frames and failed single-pane glazing are the conditions we document on every measured survey. Window Installation through Sightline means the price on that survey is the price on the final invoice.
Single & Double Hung Windows
Signs you need it
Original steel-framed single hungs in Flamingo Park or El Cid that rattle in their tracks, show rust bleeding through the frame, or no longer hold position when opened.
What it costs in West Palm Beach
Single and double hung window installation in West Palm Beach typically runs $850-$1,650 per opening for vinyl-framed impact-rated units, with wood-clad and aluminum options ranging $1,200-$2,400 depending on finish and hardware grade.
How we do it
We remove the existing unit, inspect the CBS or wood buck for moisture intrusion, install the new hung window with proper shimming and fastening pattern per the FPA installation instruction, then seal with backer rod and sealant rated for marine exposure.
Horizontal Roller Windows
Signs you need it
Aluminum horizontal rollers in mid-century tract homes with corroded tracks, cracked wheels, or frames that no longer slide smoothly under hand pressure.
What it costs in West Palm Beach
Horizontal roller window installation in West Palm Beach ranges $950-$1,850 per opening for impact-rated vinyl or aluminum units, with oversized configurations and custom exterior colors adding $200-$400 per unit.
How we do it
We document the existing track depth and frame depth, specify a replacement roller with stainless hardware and marine-grade finish, install with continuous head and sill fastening, then operate-test and photograph the completed assembly.
What Window Installation Costs in West Palm Beach
| Item | Typical range in West Palm Beach |
|---|---|
| Single or double hung window, vinyl impact-rated | $850 - $1,650 |
| Horizontal roller window, impact-rated | $950 - $1,850 |
| Whole-home retrofit, 10-15 openings | $8,500 - $18,500 |
How long does window installation take in West Palm Beach?
Most single-opening replacements complete in one day. Whole-home retrofits of 10-15 windows typically run 2-4 days depending on exterior access, historic district scaffolding requirements, and weather. Call (561) 354-3861 for a written timeline with your estimate.
Do you handle permits for window installation in West Palm Beach?
Yes. We pull the building permit, submit Florida Product Approval documentation, and schedule inspection. Historic district jobs include Historic Preservation Board submittal where required. The permit cost is itemized on your written quote, not added later.
Door Installation in West Palm Beach
Door installation in West Palm Beach means replacing corroded aluminum sliders and un-rated entry doors in mid-century CBS homes, and specifying impact-rated front entries for Mediterranean Revival properties that must also satisfy Historic Preservation Board guidelines on frame profile and finish. Salt air attacks bottom tracks, thresholds, and hinges first. Door Installation through Sightline includes a documented photo record of the existing unit and the completed assembly.
Entry Doors
Signs you need it
Steel entry door with rust at the bottom edge, delaminated finish, or a frame that no longer seals against weatherstripping.
What it costs in West Palm Beach
Entry door installation in West Palm Beach ranges $1,850-$3,400 for fiberglass or steel impact-rated units, with Therma-Tru and ViewLux options spanning the range depending on glass configuration and hardware grade.
How we do it
We measure the rough opening and existing frame squareness, specify the door unit with proper jamb width for your wall construction, install with shims and structural screws, then seal the perimeter and photograph the completed assembly.
Hurricane-Proof Front & Entry Doors
Signs you need it
Current front door carries no Florida Product Approval, or the existing impact-rated unit has cracked laminated glass or failed door-edge seals.
What it costs in West Palm Beach
Hurricane-proof front door installation in West Palm Beach typically runs $2,400-$4,200 for high-design-pressure units with decorative glass, with solid-panel and simpler lite configurations at the lower end.
How we do it
We verify the design pressure requirement for your specific Palm Beach County wind zone, specify the door and frame with matching FPA documentation, install with proper anchoring pattern, and leave the approval paperwork with you for inspection.
What Door Installation Costs in West Palm Beach
| Item | Typical range in West Palm Beach |
|---|---|
| Entry door, fiberglass or steel impact-rated | $1,850 - $3,400 |
| Hurricane-proof front door, high DP rating | $2,400 - $4,200 |
| Patio door replacement, sliding or French | $2,200 - $4,500 |
Can you match historic district requirements for front doors in West Palm Beach?
Yes. We specify Therma-Tru and ViewLux entry systems with approved frame profiles, muntin patterns, and finishes that satisfy the Historic Preservation Board for Flamingo Park, El Cid, and Grandview Heights. Call (561) 354-3861 to review the approved manufacturer list.
What is included in a door installation quote?
The measured survey, the door unit, hardware, installation labor, sealant, permit fees, and inspection scheduling. The written price before work starts is the final price. No change orders.
Energy-Efficient Windows in West Palm Beach
Energy-efficient window installation in West Palm Beach addresses the solar heat gain and cooling load that single-pane jalousie and uncoated aluminum windows allow into mid-century and historic homes alike. Low-E coatings and argon gas fill reduce the load on aging HVAC systems in concrete block construction that stores and radiates heat. Energy-Efficient Windows through Sightline are specified by U-factor and SHGC performance, not by stock availability.
Low-E & Argon Gas Glass
Signs you need it
Rooms with south or west exposure that stay uncomfortably warm after sunset, or utility bills that spike in summer despite thermostat settings.
What it costs in West Palm Beach
Low-E and argon gas glass upgrades add $80-$180 per opening to the base window price, with dual-pane low-E argon units typically ranging $950-$1,750 installed depending on frame material and size.
How we do it
We calculate the solar orientation and cooling load for each opening, specify the appropriate low-E coating and argon fill level, and install with warm-edge spacers to maintain the thermal break integrity.
ENERGY STAR Replacement Windows
Signs you need it
Existing windows carry no NFRC label, or the label shows U-factor above 0.40 and SHGC above 0.25 for South Florida climate zone requirements.
What it costs in West Palm Beach
ENERGY STAR replacement window installation in West Palm Beach ranges $1,050-$2,100 per opening for certified vinyl or composite frames, with performance-tier upgrades in the $1,500-$2,800 range.
How we do it
We verify the NFRC certification for each specified unit, document the U-factor and SHGC on your written quote, install per manufacturer instruction for the climate zone, and photograph the NFRC label in place.
What Energy-Efficient Windows Costs in West Palm Beach
| Item | Typical range in West Palm Beach |
|---|---|
| Low-E argon upgrade, per opening | $950 - $1,750 |
| ENERGY STAR certified replacement window | $1,050 - $2,100 |
| Whole-home energy-efficient retrofit, 10-15 openings | $10,500 - $24,000 |
Will energy-efficient windows lower my cooling costs in West Palm Beach?
Yes. Properly specified low-E argon units with SHGC below 0.25 reduce solar heat gain significantly in concrete block construction. Most homeowners see measurable cooling load reduction within one billing cycle. Call (561) 354-3861 for a performance estimate based on your home’s orientation.
Do energy-efficient windows still need to be impact-rated in West Palm Beach?
Yes. Every window we install in West Palm Beach carries Florida Product Approval for wind-borne debris. Energy performance and impact rating are not mutually exclusive; we specify both on the same unit and document both on the quote.
Impact Garage Doors in West Palm Beach
Impact garage door installation in West Palm Beach protects the largest opening in most homes, a critical breach point for wind pressure and debris in 140-plus mph design load zones. Many existing garage doors in mid-century CBS construction are un-rated aluminum or thin steel panels that fail code and insurance requirements. Impact Garage Doors through Sightline include wind-load engineering documentation and permit submission.
Hurricane-Rated Garage Doors
Signs you need it
Existing garage door carries no wind-load sticker, or the sticker shows a design pressure below what Palm Beach County requires for your exposure category.
What it costs in West Palm Beach
Hurricane-rated garage door installation in West Palm Beach ranges $2,800-$5,500 for single-car openings and $4,200-$7,800 for double-car, depending on wind-load rating, insulation level, and window lite configuration.
How we do it
We measure the opening and verify the exposure category, specify the door and track system with matching FPA documentation, install with proper spring balance and wind-load reinforcement, then test operation and photograph the rating label.
Wind-Load Code Compliance
Signs you need it
Building permit for window or door replacement triggered a garage door inspection, or insurance renewal requires documentation of code-compliant garage protection.
What it costs in West Palm Beach
Wind-load code compliance upgrades for existing garage doors in West Palm Beach typically run $1,800-$3,400 for reinforcement kits and hardware, or $3,200-$6,500 for full door replacement when the existing unit cannot be upgraded.
How we do it
We inspect the existing door, track, and spring system for upgrade potential, specify either a reinforcement package or full replacement with proper engineering documentation, and submit the FPA paperwork with the permit application.
What Impact Garage Doors Costs in West Palm Beach
| Item | Typical range in West Palm Beach |
|---|---|
| Hurricane-rated garage door, single-car | $2,800 - $5,500 |
| Hurricane-rated garage door, double-car | $4,200 - $7,800 |
| Wind-load reinforcement of existing door | $1,800 - $3,400 |
Does my garage door need to be impact-rated if I am only replacing windows?
Sometimes. Permits for extensive window replacement can trigger whole-envelope inspection requirements. We check the scope against current Palm Beach County enforcement and include garage documentation in the permit package if needed. Call (561) 354-3861 to verify your specific project.
Can you upgrade my existing garage door or does it need full replacement?
We inspect the door panel, track gauge, and spring system first. Some mid-grade steel doors accept reinforcement kits; lightweight aluminum or corroded units require full replacement. The written quote names which path applies to your opening.
Custom & Geometric Windows in West Palm Beach
Custom and geometric window installation in West Palm Beach serves the arched and shaped openings in 1920s-1940s Mediterranean Revival homes throughout Flamingo Park, El Cid, and Grandview Heights, where the Historic Preservation Board restricts replacement to profiles that match original sightlines. These are not stock items. Custom & Geometric Windows through Sightline require measured templates and manufacturer engineering submittals.
Arched & Curved Windows
Signs you need it
Original arched steel or wood windows with failed glazing, rotted frames, or single-pane glass that leaks air and carries no impact rating.
What it costs in West Palm Beach
Arched and curved window installation in West Palm Beach ranges $2,400-$4,800 per opening for custom-shaped impact-rated units, with radius complexity and divided lite patterns at the upper end.
How we do it
We template the exact radius and sightline dimensions, submit the measured drawing to the manufacturer for engineering approval, produce the custom unit with FPA documentation, and install with specialized flashing for the curved head.
Oversized Openings
Signs you need it
Large rectangular or grouped openings in historic or custom homes where standard stock sizes do not maintain the original proportion or where mullion placement must match existing sightlines.
What it costs in West Palm Beach
Oversized custom window installation in West Palm Beach typically runs $3,200-$6,500 per opening depending on span, design pressure requirement, and lift method for the installation.
How we do it
We engineer the structural support for the span, specify reinforced frames from ECO Window Systems or Mr-Glass with documented design pressure, coordinate crane or specialized lift access if needed, and install with continuous fastening pattern per engineering.
What Custom & Geometric Windows Costs in West Palm Beach
| Item | Typical range in West Palm Beach |
|---|---|
| Arched or curved window, custom impact-rated | $2,400 - $4,800 |
| Oversized custom opening, engineered frame | $3,200 - $6,500 |
| Historic district custom match, full documentation | $2,800 - $5,200 |
How long does custom window manufacturing take for West Palm Beach?
Custom and geometric units typically require 8-12 weeks from template approval to delivery, with historic district submittals adding 2-4 weeks for board approval. We coordinate the template, submittal, and permit timelines so no step waits on another. Call (561) 354-3861 for a project schedule.
Do custom windows still meet impact requirements in West Palm Beach?
Yes. Every custom unit we specify carries Florida Product Approval for the design pressure required at your specific Palm Beach County wind zone. The approval number is written on your quote and submitted with the permit.
Brands We Service in West Palm Beach
We install and service PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux across West Palm Beach, with parts and hardware stocked for common repair and replacement scenarios. Most standard orders arrive within 2-3 weeks; custom and geometric units run longer. our brands are specified by what the opening requires, not by warehouse inventory.
Pricing for Windows & Doors in West Palm Beach, FL
| Service | Typical range in West Palm Beach |
|---|---|
| Single or double hung window, vinyl impact-rated | $850 - $1,650 |
| Horizontal roller window, impact-rated | $950 - $1,850 |
| Entry door, fiberglass or steel impact-rated | $1,850 - $3,400 |
| Hurricane-proof front door, high DP rating | $2,400 - $4,200 |
| Low-E argon energy-efficient window | $950 - $1,750 |
| ENERGY STAR certified replacement window | $1,050 - $2,100 |
| Hurricane-rated garage door, single-car | $2,800 - $5,500 |
| Hurricane-rated garage door, double-car | $4,200 - $7,800 |
| Arched or curved custom window | $2,400 - $4,800 |
| Oversized custom engineered opening | $3,200 - $6,500 |
Prices in West Palm Beach increase with marine-grade hardware upgrades, historic district custom profiles, and crane access for oversized units. The written price on your measured survey includes every item above; nothing is added after work begins.
Neighborhoods We Serve in West Palm Beach
Our crews work throughout West Palm Beach, from the historic districts to the mid-century tracts and newer infill. Scheduling and dispatch are coordinated from our South Florida office with route optimization for the local area.
- Flamingo Park
- El Cid
- Grandview Heights
- Southland Park
- Northwood
Service Area - Cities Near West Palm Beach
We serve West Palm Beach and the surrounding communities directly, including Palm Beach, FL across the bridges, Greenacres, FL to the west, North Palm Beach, FL to the north, and Palm Beach Gardens, FL further up the corridor. Each city carries its own permit jurisdiction and product approval requirements; we document the correct set for your location.
Serving West Palm Beach, FL - Our Local Coverage Area
We’re based in the West Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in West Palm Beach
West Palm Beach requires Florida Product Approval, not the stricter Miami-Dade NOA certification. We have seen contractors from both directions pull the wrong documentation. Every product we specify carries the correct approval for your Palm Beach County wind zone, and the approval number is written on your quote.
Properties in Flamingo Park, El Cid, Grandview Heights, and other designated districts require board approval for changes to visible frame profiles, muntin patterns, and finishes. We submit the manufacturer documentation and finish samples as part of the permit package when required.
We typically schedule measured surveys within 3-5 business days of contact. Live phone coverage is available 24/7 at (561) 354-3861 to book your appointment. The survey itself takes 45-90 minutes depending on opening count, and you keep the written document.
Call (561) 354-3861 to schedule your free measured survey. The written price before any work starts is Haven Clause 1. The 365-Day Done Right Promise is Haven Clause 5. Every job leaves a documented photo record. That is the standard.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What West Palm Beach Customers Say
"Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.