Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Jupiter, FL
Window installation in Jupiter, FL typically runs $650-$1,400 per opening for standard vinyl or aluminum replacement, with impact-rated units starting around $1,100 and climbing based on size, glazing spec, and exposure rating. Most Jupiter homes we survey need more than a simple swap - the combination of 1970s-1980s aluminum framing, salt-air corrosion from the Loxahatchee River corridor, and Palm Beach County’s wind-borne debris requirements means the measured survey and the final scope rarely match the original opening. Call (561) 354-3861 to schedule your free measured survey; the written quote you receive is the same document our crew works from, with no change orders once the job is approved.
We are Sightline Windows & Doors, independently owned and operated under the Haven Standard since 2012. Every one of the 18,000+ openings we’ve installed began with a written price and ended with a documented photo record the customer keeps. Our crews serving Jupiter are dispatched from our South Florida office, background-checked, uniformed, and identified by license number before arrival.
Why Jupiter Homes Are Different
Jupiter sits at the mouth of the Loxahatchee River where it meets the Atlantic at Jupiter Inlet, creating a dual salt-air corridor - ocean and brackish river - that pushes corrosive conditions further inland than in most coastal Florida markets. Aluminum window frames and door hardware corrode aggressively even on properties that aren’t oceanfront, and virtually every pre-2000 home in Jupiter faces both a corrosion-replacement need and a mandatory upgrade to Palm Beach County’s wind-borne debris region impact-glazing requirements simultaneously.
The housing stock tells the story. Established neighborhoods like Admiralty are dominated by 1970s-1980s CBS construction with original single-pane aluminum sliding windows that are both energy-inefficient and non-compliant with current Florida Building Code wind-load standards. The Abacoa planned community, built from the late 1990s through the 2010s, is now aging into its first full window replacement cycle. Contractors working river-corridor neighborhoods consistently find that even “marine-grade” aluminum frames corrode at the corners within 8-12 years due to brackish tidal influence - a shorter failure timeline than purely oceanfront Boca Raton, and one that catches homeowners off guard because they don’t consider themselves “waterfront” even when their backyard drains to a tidal canal.
Jupiter also receives among the heaviest annual rainfall in the region, accelerating seal failure and wood-buck rot around door frames in non-impact installations. Palm Beach County’s wind-borne debris region designation pulls a disproportionately large share of city parcels into high-exposure zones given the convergence of the Intracoastal Waterway, the Loxahatchee River, and the Atlantic.
Our Main Jupiter Services
Most calls we field from Jupiter homeowners center on two needs: full window replacement for aging, corroded, or non-compliant openings, and impact-rated upgrades to meet current code. Below are the three services with dedicated Jupiter pages.
Window Replacement in Jupiter
We replace single-pane aluminum sliders, corroded horizontal rollers, and failed insulated units across Jupiter’s housing stock, from Admiralty’s 1980s CBS builds to Abacoa’s first-generation vinyl now yellowing and losing seal integrity. Every replacement begins with a measured survey that captures frame squareness, wall thickness, and exposure rating - the document you keep, and the exact scope we execute. Window Replacement in Jupiter covers full-frame versus insert replacement, impact versus non-impact specification, and what the county inspector will check.
Impact Windows & Doors in Jupiter
Palm Beach County’s wind-borne debris region means Jupiter properties in high-exposure zones need impact-rated glazing or approved shutters on every opening. We specify PGT, CGI, and ES Windows products by exposure tier and price range, not by margin, and pull permits through the Palm Beach County building department with inspections passed before final invoicing. Impact Windows & Doors in Jupiter details the product lines, the permit process, and the documented photo record you receive.
Sliding & Patio Doors in Jupiter
Jupiter’s river-corridor humidity and salt air destroy patio door rollers, corrode tracks, and delaminate doorlite seals faster than inland markets. We measure the rough opening, specify the roller system and threshold by exposure rating, and install with continuous sill pan flashing to handle Jupiter’s rainfall volume. Sliding & Patio Doors in Jupiter covers multi-panel systems, impact-rated options, and the measured survey process.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Jupiter
Window installation in Jupiter demands more than product selection - it requires matching the glazing system to the specific exposure of each elevation. Homes in river-corridor neighborhoods like Pennock Point see brackish air infiltration that corrodes standard aluminum corners within a decade, while inland Abacoa properties face different solar heat gain profiles that push cooling loads higher than the original 1990s specifications anticipated. Our Window Installation process begins with a measured survey that records frame condition, wall composition, and exposure rating; the written quote derived from that survey is the same document the crew uses on installation day.
Single & Double Hung Windows
Signs you need it
Upper sash won’t stay raised, balance shoes are broken or missing, or you feel air infiltration at the meeting rail during a northeast wind off the Atlantic.
What it costs in Jupiter
Standard vinyl single or double hung installation in Jupiter typically ranges $650-$980 per opening; impact-rated units with laminated glass run $1,100-$1,650.
How we do it
We remove the sash, inspect the jamb for rot or corrosion, install the new unit with backer rod and sealant rated for Jupiter’s UV exposure, then photograph the installation and the operational test before the crew leaves.
Horizontal Roller Windows
Signs you need it
Roller wheels grind or skip, the sash tilts in the track, or the weep holes are clogged with salt residue and sand from Jupiter’s coastal air.
What it costs in Jupiter
Horizontal roller replacement in Jupiter runs $720-$1,050 for standard units; impact-rated rollers with reinforced frames and laminated glazing range $1,200-$1,800.
How we do it
We pull the sash, clean and inspect the track for corrosion pitting, install the new unit with stainless steel rollers and a sloped sill pan, then document the drainage test with photos.
What Window Installation Costs in Jupiter
| Item | Typical range in Jupiter |
|---|---|
| Standard vinyl single/double hung | $650 - $980 |
| Impact-rated single/double hung | $1,100 - $1,650 |
| Horizontal roller (standard) | $720 - $1,050 |
| Horizontal roller (impact-rated) | $1,200 - $1,800 |
| 3-panel sliding window | $1,400 - $2,200 |
| Casement window (impact-rated) | $1,350 - $2,100 |
Do you pull permits for window installation in Jupiter?
Yes. Palm Beach County requires permits for all window replacements that change the opening size or the glazing type. We pull the permit, schedule inspections, and pass them before final invoicing - the permit number and inspection results are included in your documented photo record.
Will the price change once work starts?
No. Haven Clause 1 means the written quote from your measured survey is the final price. If we encounter concealed damage during removal, we document it, stop work, and present a written amendment for your approval before continuing - no surprise charges on the final invoice.
Door Installation in Jupiter
Door installation in Jupiter faces the same dual-corrosion threat as windows - the Loxahatchee River corridor pushes brackish air deep into neighborhoods that don’t read as waterfront, attacking hinges, thresholds, and doorlite frames from both sides. Pre-2000 homes in Admiralty and the original Tequesta Country Club area often have non-impact entry doors with rotted wood bucks behind stucco that won’t pass current wind-borne debris inspection, while newer construction in Abacoa may still carry original builder-grade fiberglass units with inadequate U-factors for Jupiter’s cooling load. Our Door Installation process specifies the frame system, hardware, and seal package by exposure rating, with every detail written into the quote before work begins.
Entry Doors
Signs you need it
Door sticks seasonally as the wood buck swells, daylight shows at the weatherstrip, or the threshold cap is cracked and letting water pool on the interior tile.
What it costs in Jupiter
Standard fiberglass or steel entry door installation in Jupiter ranges $1,200-$2,400; impact-rated units with laminated glass and reinforced frames run $2,800-$4,500.
How we do it
We remove the unit, inspect and replace the wood buck if rot is present, install the new door with a composite or aluminum threshold, apply sealant rated for Jupiter’s salt air, and photograph the reveal consistency and lock operation.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your current door lacks a Miami-Dade or Florida Product Approval number, or you’re in a high-velocity hurricane zone and need the opening rated for wind-borne debris without shutter deployment.
What it costs in Jupiter
Impact-rated entry door systems in Jupiter with approved hardware and laminated glass typically range $3,200-$5,800 depending on size, sidelite configuration, and hardware grade.
How we do it
We verify the exposure rating from your measured survey, specify the door, frame, and hardware from our approved manufacturer lines, pull the permit, install with continuous flashing, and pass county inspection before final documentation.
What Door Installation Costs in Jupiter
| Item | Typical range in Jupiter |
|---|---|
| Standard fiberglass/steel entry door | $1,200 - $2,400 |
| Impact-rated entry door system | $2,800 - $5,800 |
| French door pair (standard) | $2,400 - $3,800 |
| French door pair (impact-rated) | $4,200 - $6,500 |
| Sliding patio door (standard) | $1,800 - $3,200 |
| Sliding patio door (impact-rated) | $3,500 - $5,400 |
Do impact doors require shutters in Jupiter?
Impact-rated doors with a Florida Product Approval number and proper installation certificate satisfy Palm Beach County’s wind-borne debris requirements without shutters, provided the entire opening system - door, frame, and hardware - is rated together as an assembly.
How long does door installation take in Jupiter?
Standard entry door replacement is typically one day; impact-rated systems with sidelites or transoms may require two days to allow proper sealant curing before hardware finalization. We schedule inspections before the crew leaves the site.
Energy-Efficient Windows in Jupiter
Energy-efficient windows in Jupiter address a specific climate reality: the city’s solar heat gain is among the highest in Palm Beach County, and the original single-pane aluminum units in 1970s-1980s neighborhoods like Admiralty carry U-factors above 1.0 and no solar heat gain coefficient (SHGC) control whatsoever. Abacoa’s first-generation vinyl windows, while better, are now aging out of their argon gas fill and showing seal failure rates that spike cooling loads 15-25% above specification. Our Energy-Efficient Windows program specifies glazing packages by orientation and cooling-degree-day profile, not by a one-size-fits-all efficiency badge.
Low-E & Argon Gas Glass
Signs you need it
Your west-facing rooms overheat by mid-afternoon, your HVAC runs continuously August through October, or you can feel radiant heat through the glass even with blinds closed.
What it costs in Jupiter
Low-E with argon gas fill added to standard vinyl window installation in Jupiter typically adds $80-$140 per opening; full replacement with dual-pane Low-E/argon units ranges $780-$1,150.
How we do it
We measure each elevation’s sun exposure, specify the Low-E coating type (hard-coat for high sun, soft-coat for balanced performance), fill with argon at the factory, and verify the gas retention with documentation from the manufacturer.
ENERGY STAR Replacement Windows
Signs you need it
Your current windows predate the 2015 ENERGY STAR climate zone revision for South Florida, or you’re replacing cooling equipment and want the load calculation matched to the envelope performance.
What it costs in Jupiter
ENERGY STAR certified replacement windows in Jupiter, specified for the South-Central climate zone, typically range $850-$1,350 per opening for vinyl frame systems with qualifying U-factor and SHGC ratings.
How we do it
We verify the product’s NFRC label matches Jupiter’s climate zone requirements, install with proper air sealing to achieve the rated performance (not just the product rating), and document the label numbers in your photo record.
What Energy-Efficient Windows Costs in Jupiter
| Item | Typical range in Jupiter |
|---|---|
| Low-E/argon upgrade (add to standard) | $80 - $140 per opening |
| Dual-pane Low-E/argon replacement | $780 - $1,150 |
| ENERGY STAR certified vinyl replacement | $850 - $1,350 |
| Triple-pane or suspended film (specialty) | $1,600 - $2,400 |
| Solar/tinted glass upgrade | $120 - $220 per opening |
| UV-blocking laminated (fade protection) | $950 - $1,450 |
Will energy-efficient windows lower my cooling bill in Jupiter?
Yes, typically 10-20% when combined with proper air sealing, though the exact savings depend on your current window condition, HVAC efficiency, and insulation levels. We measure the envelope performance before specifying the glazing package so the improvement is documented, not assumed.
What’s the payback period for efficient windows in Jupiter?
Most Jupiter homeowners see simple payback in 7-12 years at current FPL rates, faster if you’re replacing failed units already leaking air and water. The measured survey includes a frame condition assessment so you know whether repair or full replacement is the better investment.
Impact Garage Doors in Jupiter
Impact garage doors in Jupiter are a code requirement, not an option, for homes in Palm Beach County’s wind-borne debris region - and Jupiter’s geography pulls more parcels into that zone than inland markets because the Intracoastal Waterway, Loxahatchee River, and Atlantic convergence expands the high-exposure boundary. Original garage doors in 1970s-1980s Admiralty construction are typically uninsulated, non-impact steel or wood panels that fail both structurally and thermally; even 1990s-2000s builder-grade units lack the wind-load certification required for current resale inspection. Our Impact Garage Doors program specifies the door, track, and hardware as a tested assembly, with permit and inspection included in every scope.
Hurricane-Rated Garage Doors
Signs you need it
Your current door lacks a wind-load sticker, the track is mounted to the jamb with lag bolts rather than engineered brackets, or your insurance inspection flagged the garage opening as non-compliant.
What it costs in Jupiter
Hurricane-rated garage door replacement in Jupiter, including the door, track, hardware, and installation, typically ranges $2,400-$4,200 for a standard two-car opening; oversized or custom-height units run $4,500-$7,200.
How we do it
We measure the rough opening and confirm the wind-load requirement from Palm Beach County’s zone map, specify the door and track as a tested assembly from Mr-Glass or Therma-Tru, pull the permit, and install with engineered brackets and struts that pass inspection.
Wind-Load Code Compliance
Signs you need it
You’re selling the home and the buyer’s inspection requires wind-borne debris compliance, or you’ve received a notice of violation from Palm Beach County after a prior installation failed inspection.
What it costs in Jupiter
Wind-load retrofit of an existing garage door in Jupiter - adding struts, brackets, and hardware to bring a structurally sound door into compliance - typically ranges $1,200-$2,400; full replacement with a rated assembly is often the better value.
How we do it
We assess the existing door’s structural condition, calculate the required wind-load rating from your exposure, and present both retrofit and replacement options in writing with the exact hardware specifications and permit path for each.
What Impact Garage Doors Costs in Jupiter
| Item | Typical range in Jupiter |
|---|---|
| Hurricane-rated door (standard 2-car) | $2,400 - $4,200 |
| Hurricane-rated door (oversized/custom) | $4,500 - $7,200 |
| Wind-load retrofit (existing door) | $1,200 - $2,400 |
| Insulated impact-rated upgrade | $3,200 - $5,400 |
| High-cycle spring/hardware package | $400 - $800 |
Do I need a permit to replace my garage door in Jupiter?
Yes. Palm Beach County requires a building permit for all garage door replacements that change the door or its operating hardware. We pull the permit, schedule inspection, and pass it before final invoicing - the permit closure is documented in your photo record.
Can I keep my existing opener with a new impact door?
Sometimes. We test the opener’s torque rating, safety reverse function, and rail condition during the measured survey; if it meets the new door’s weight and balance specifications, we document the compatibility in writing. If not, we specify the replacement in the original quote, not as a surprise add-on.
Custom & Geometric Windows in Jupiter
Custom and geometric windows in Jupiter solve a specific problem: the architectural variety of the city’s housing stock - from 1980s Mediterranean-influenced estates in the Bear’s Club area to the Craftsman and Coastal vernaculars of Abacoa - demands shapes and sizes that standard catalog units don’t address. Meanwhile, Palm Beach County’s wind-borne debris requirements mean every custom opening still needs impact-rated glazing or approved shutters, and the geometric stress points (arched tops, radius corners, oversized lites) concentrate wind load in ways that demand engineering, not just aesthetic selection. Our Custom & Geometric Windows process begins with a field-measured template that captures the exact radius, chord, or irregular shape, with the engineering review completed before any glass is ordered.
Geometric & Shaped Windows
Signs you need it
Your gable-end window is a trapezoid or triangle with no replacement available from standard catalogs, or the original custom unit has failed and the manufacturer no longer exists.
What it costs in Jupiter
Geometric and shaped window replacement in Jupiter, including field measurement, engineering review, and custom fabrication, typically ranges $1,800-$3,500 per opening; impact-rated laminated glass adds $600-$1,200 depending on size and complexity.
How we do it
We template the opening in the field with digital radius measurement, submit to the manufacturer for engineering review against Palm Beach County wind-load requirements, fabricate from ECO Window Systems or ViewLux lines, and install with custom flashings that match the original stucco profile.
Arched & Curved Windows
Signs you need it
The radius top of your window has separated from the rectangular base, the curved glass has developed a stress crack, or you’re replacing a rectangular unit with an arched top to match the original architectural intent.
What it costs in Jupiter
Arched and curved window installation in Jupiter ranges $2,200-$4,200 for the complete assembly; split-jamb radius tops with standard rectangular bases run $1,400-$2,600 depending on the radius complexity.
How we do it
We measure the springline, rise, and radius with digital tools, verify the structural header can carry the concentrated load of a curved lite, specify the unit with factory-applied exterior trim to eliminate field-mitering errors, and document the reveal and sealant continuity with photos.
What Custom & Geometric Windows Costs in Jupiter
| Item | Typical range in Jupiter |
|---|---|
| Geometric/shaped window (standard) | $1,800 - $3,500 |
| Geometric with impact-rated glazing | $2,400 - $4,700 |
| Arched/curved window assembly | $2,200 - $4,200 |
| Radius top with standard base | $1,400 - $2,600 |
| Oversized opening (custom engineering) | $3,500 - $6,800 |
| Field template and measurement fee | $250 - $400 (credited to job) |
How long does custom window fabrication take?
Typically 6-10 weeks from approved template to delivery, depending on complexity and manufacturer line. We don’t schedule removal until the unit is in our warehouse and inspected, so your opening is never left exposed waiting on freight.
Can custom windows be impact-rated in Jupiter?
Yes. Every custom geometric unit we specify carries a Florida Product Approval or Miami-Dade Notice of Acceptance for the exact size and configuration, with the approval number written into your quote and permit application before fabrication begins.
Brands We Service in Jupiter
We specify from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - selected by performance tier and price range for what your opening requires, not by what we have in stock. Parts for ES Windows, ECO Window Systems, and Therma-Tru are stocked at our South Florida warehouse, with most service calls in Jupiter turning around within 48 hours. Our brands page lists the full product matrix and warranty terms.
Pricing for Windows & Doors in Jupiter, FL
| Service | Typical range in Jupiter |
|---|---|
| Standard vinyl single/double hung window | $650 - $980 |
| Impact-rated single/double hung window | $1,100 - $1,650 |
| Horizontal roller window (standard) | $720 - $1,050 |
| Horizontal roller window (impact-rated) | $1,200 - $1,800 |
| Standard fiberglass/steel entry door | $1,200 - $2,400 |
| Impact-rated entry door system | $2,800 - $5,800 |
| Low-E/argon upgrade (add to standard window) | $80 - $140 per opening |
| ENERGY STAR certified window replacement | $850 - $1,350 |
| Hurricane-rated garage door (2-car) | $2,400 - $4,200 |
| Geometric/shaped custom window | $1,800 - $3,500 |
| Arched/curved window assembly | $2,200 - $4,200 |
| Sliding patio door (impact-rated) | $3,500 - $5,400 |
Prices in Jupiter trend toward the upper end of these ranges for river-corridor properties requiring corrosion remediation of the surrounding frame, and for any opening needing engineered flashing to handle the area’s rainfall volume. Haven Clause 1 means your written quote is derived from the measured survey and cannot change without a written amendment you approve - no change orders, no surprise charges.
Neighborhoods We Serve in Jupiter
Our crews work throughout Jupiter’s established and developing neighborhoods, from the 1970s-1980s CBS homes of Admiralty to the townhomes and single-families of Abacoa now aging into first replacement cycles. River-corridor properties along the Loxahatchee and its tributaries receive priority scheduling for corrosion assessments given the accelerated failure timeline brackish air creates. Dispatch and scheduling are coordinated from our South Florida office; most Jupiter appointments are available within 3-5 business days of your call.
- Admiralty
- Abacoa
- Pennock Point
- Tequesta Country Club area
- Bear’s Club vicinity
Service Area - Cities Near Jupiter
We install and replace windows and doors throughout northern Palm Beach County, with crews serving Palm Beach Gardens, FL, North Palm Beach, FL, West Palm Beach, FL, and Palm Beach, FL from the same South Florida dispatch office. Each city page documents the local conditions, pricing, and permit requirements specific to that market - no templated copy, because the housing stock and exposure ratings differ materially from Jupiter’s river-corridor geography.
Serving Jupiter, FL - Our Local Coverage Area
We’re based in the Jupiter area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Jupiter
Yes. Palm Beach County requires building permits for all window replacements that change the glazing type, frame material, or opening dimensions. We pull the permit, schedule required inspections, and pass them before final invoicing - the permit number and inspection results are part of your documented photo record.
Most Jupiter HOAs, including Abacoa’s architectural review committees, require pre-approval of window style, color, and sometimes manufacturer. We provide the product data sheets, color samples, and Miami-Dade or Florida Product Approval documentation needed for your application, and we don’t schedule installation until written HOA approval is in hand.
Call (561) 354-3861 - a live person answers, 24/7. We’ll confirm your address, note any HOA or exposure-specific concerns, and schedule the survey. You’ll receive the written quote within 48 hours of the survey, and it is the same document our crew works from on installation day.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Jupiter Customers Say
"The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C.