Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Wellington, FL
Window and door installation in Wellington, FL typically runs $650-$2,400 per opening depending on size, glazing specification, and whether the unit must carry a Florida Product Approval for the village’s 140 mph wind zone. Most Wellington homes were built between 1985 and 2005 with single-pane aluminum frames that no longer meet current code or HOA architectural standards in gated communities like Versailles and Palencia. We measure every opening to the sixteenth, write the price before any work starts, and leave a documented photo record under the Haven Standard. Call (561) 354-3861 to schedule your free estimate.
Why Wellington Homes Are Different
Wellington is a planned community where the bulk of homes were built between the mid-1980s and early 2000s, largely before Florida’s post-Hurricane Andrew impact-glass code overhaul took full effect. Its affluent, HOA-governed gated neighborhoods - Versailles, Olympia, and Palencia - routinely prohibit accordion or panel shutters on street-facing facades. That combination makes full impact window and door replacement the only path that satisfies both Palm Beach County’s wind-load code and the architectural review boards simultaneously, driving complete changeouts rather than shutter add-ons.
The housing stock is predominantly CBS construction in Mediterranean and Spanish-tile styles, almost universally featuring large sliding glass doors opening onto screened pool enclosures. This high-exposure configuration requires oversized impact-rated sliding door units and is the single most common replacement job in the village. Homes in older sections built right around the Andrew era frequently have aluminum single-pane sliding glass doors with steel hardware that has corroded shut from years of humidity and pool-chemical exposure. Out-of-area companies unfamiliar with CBS rough-opening framing standards here routinely mis-size replacements.
Wellington sits roughly 15 miles inland in Palm Beach County’s 140+ mph design wind zone, meaning every replacement must meet Florida Product Approval standards. Intense summer humidity and afternoon thunderstorm cycles accelerate seal failure and frame corrosion on original single-pane aluminum windows still found in pre-1993 homes throughout the community.
Our Main Wellington Services
Most calls from Wellington homeowners center on two needs: full-frame window replacement for aging single-pane units, and impact-rated installations that satisfy both code and HOA requirements without visible shutters.
Window Replacement in Wellington
We replace original aluminum single-pane windows throughout Wellington’s 1985-2005 housing stock, measuring each rough opening to CBS framing standards and specifying impact-rated or energy-efficient units from PGT, CGI, and ECO Window Systems based on the opening’s exposure and the HOA’s design guidelines. Every job starts with a measured survey you keep, and the written quote matches that document exactly. Window Replacement in Wellington
Impact Windows & Doors in Wellington
Impact-rated installations are the only solution for Wellington homeowners whose HOAs prohibit visible shutters on street-facing facades. We specify Florida Product Approved units from PGT, CGI, and CWS that meet Palm Beach County’s 140 mph wind zone requirements while passing architectural review in Versailles, Olympia, and Palencia. The measured survey and written price are the same document. Impact Windows & Doors in Wellington
Sliding & Patio Doors in Wellington
Oversized sliding glass doors opening onto pool enclosures are the most common replacement in Wellington, where corroded steel hardware and failed seals on original aluminum units create security and weather barriers. We specify impact-rated 2-panel and 3-panel rollers from PGT and ES Windows sized to CBS rough openings, with hardware rated for salt-air and pool-chemical exposure. Sliding & Patio Doors in Wellington
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Wellington
Window installation in Wellington means working with CBS stucco construction, 1985-2005 rough openings that rarely match modern standard sizes, and HOAs that require specific sightline profiles for street-facing elevations. The original single-pane aluminum windows in pre-1993 homes here have typically suffered seal failure and frame corrosion from humidity and thunderstorm cycling, and their non-impact rating no longer satisfies Palm Beach County’s wind zone requirements. We approach each opening as a measured replacement, not a size-from-sticker swap, because the framing standards in Wellington’s planned communities differ from conventional stick-built construction. Window Installation through Sightline follows the Haven Standard on every job.
Single & Double Hung Windows
Signs you need it
Your single hung aluminum windows no longer stay open without a prop, the balances have failed, or you feel air movement at the meeting rail during afternoon thunderstorms.
What it costs in Wellington
Single and double hung window installation in Wellington typically ranges $650-$1,400 per opening for vinyl-framed impact-rated units, with wood-clad and custom-color finishes toward the upper end.
How we do it
We measure the rough opening to CBS framing standards, remove the existing frame without disturbing stucco, install the new unit with Florida-approved anchoring, seal with backer rod and silicone, and photograph the sightline and seal before the job closes.
3-Panel Sliding (3-Lite Roller) Windows
Signs you need it
Your living room or master bedroom has a fixed center panel flanked by operable sliders that have corroded rollers, bent tracks, or frames that no longer square in the opening.
What it costs in Wellington
3-panel sliding window installation in Wellington typically ranges $1,200-$2,400 per unit depending on overall width, impact rating, and whether the center panel is fixed or operable.
How we do it
We verify the structural header capacity for the span, remove the existing frame, install the new 3-lite roller with impact-rated glazing and stainless hardware, adjust the rollers for level travel, and document the operational test.
What Window Installation Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Single hung vinyl impact window | $650 - $1,100 |
| Double hung vinyl impact window | $750 - $1,400 |
| 3-panel sliding impact window | $1,200 - $2,400 |
How long does window installation take in Wellington?
Most residential window installations in Wellington complete in one to three days depending on opening count, with impact-rated units in CBS stucco requiring slightly longer for proper seal curing than vinyl siding jobs we’ve handled elsewhere. Call (561) 354-3861 for a measured survey and exact timeline.
Do you handle HOA approval for window replacement in Wellington?
We provide the product data sheets, Florida Product Approval numbers, and sightline drawings that Wellington HOAs including Versailles and Palencia require for architectural review, though the homeowner submits the application. Call (561) 354-3861 and we’ll prepare the documentation package.
Door Installation in Wellington
Door installation in Wellington centers on two realities: the village’s 140 mph wind zone requires Florida Product Approved units on every exterior opening, and HOA architectural review boards in gated communities prohibit visible shutter systems that would otherwise satisfy code on existing doors. The original steel and aluminum patio doors in 1985-2005 homes have corroded hardware and failed weatherstripping from humidity and pool-chemical exposure, creating both security vulnerabilities and air infiltration paths. Door Installation through Sightline specifies the right unit for the opening, not the one in stock.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your front door shows daylight at the jamb, the deadbolt no longer seats flush, or your HOA has notified you that non-impact rated doors must be upgraded without visible shutters.
What it costs in Wellington
Hurricane-proof entry door installation in Wellington typically ranges $1,800-$4,500 including frame, hardware, and Florida Product Approved impact glazing or solid core.
How we do it
We measure the rough opening for plumb and square in the CBS frame, remove the existing door and jamb, install the new impact-rated unit with multi-point locking hardware, shim and anchor to structural framing, and test the lock and seal before documenting.
French & Double Doors
Signs you need it
Your French doors no longer meet evenly at the astragal, the inactive panel has dropped on its hinges, or you need an impact-rated pair opening to the pool enclosure that satisfies both code and HOA sightline requirements.
What it costs in Wellington
French and double door installation in Wellington typically ranges $2,200-$5,500 per pair depending on width, impact rating, and whether the unit includes integrated blinds or multi-point hardware.
How we do it
We verify header capacity for the doubled width, install the new impact-rated French door pair with adjustable hinges and multi-point lock, align the active and inactive panels at the astragal, and adjust the sweep and weatherstrip for positive seal.
What Door Installation Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Hurricane-proof entry door | $1,800 - $4,500 |
| French & double door pair | $2,200 - $5,500 |
| Standard replacement patio door | $1,400 - $3,200 |
Can you match my HOA’s required door style in Wellington?
We specify from eight manufacturer lines including Therma-Tru and ViewLux to match the Mediterranean and Spanish-tile sightline profiles required by Wellington HOAs, with product data sheets for architectural review. Call (561) 354-3861 to review your HOA’s design guidelines.
Do French doors in Wellington need impact rating?
Every exterior door in Wellington’s Palm Beach County wind zone must carry Florida Product Approval for 140+ mph, including French doors; non-rated units require visible shutters that most gated communities prohibit. Call (561) 354-3861 for a specification that satisfies both requirements.
Energy-Efficient Windows in Wellington
Energy-efficient window installation in Wellington addresses a specific climate burden: original single-pane aluminum windows in the village’s 1985-2005 housing stock conduct heat directly into conditioned space, and their failed seals admit humidity that drives air conditioning load during six-month summer cycles. The afternoon thunderstorm pattern here also means rapid temperature and pressure changes that stress conventional glazing seals, accelerating failure in non-insulated units. Energy-Efficient Windows from Sightline are specified by U-factor and SHGC for this exact climate, not by margin.
Low-E & Argon Gas Glass
Signs you need it
Your west and south-facing rooms stay uncomfortably warm after 2 PM, your air conditioner runs continuously through afternoon thunderstorm cycles, or you feel radiant heat through the glass even when the window is closed.
What it costs in Wellington
Low-E with argon gas upgrade in Wellington typically adds $80-$180 per opening to the base window price, with payback periods under four years given local cooling loads.
How we do it
We specify the appropriate Low-E coating for Wellington’s solar exposure, verify argon fill retention at factory and field, and document the U-factor and SHGC ratings on your written quote for rebate and HOA documentation.
Insulated Laminated Glass
Signs you need it
You want both impact protection and thermal performance in a single unit, or your HOA requires impact rating but you also need to reduce the cooling load from unshaded western exposures common in Wellington’s pool-enclosure configurations.
What it costs in Wellington
Insulated laminated glass in Wellington typically ranges $950-$2,100 per opening, combining impact-rated outer lite, Low-E coating, and argon-filled air space in a single certified unit.
How we do it
We specify the insulated laminated unit from PGT or ECO Window Systems with the correct interlayer and spacer for Wellington’s humidity, verify Florida Product Approval and ENERGY STAR certification, and install with thermal break framing to prevent condensation.
What Energy-Efficient Windows Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Low-E + argon upgrade (add to base window) | $80 - $180 |
| Insulated laminated impact window | $950 - $2,100 |
| ENERGY STAR replacement window package | $750 - $1,600 |
Will energy-efficient windows lower my electric bill in Wellington?
Most Wellington homeowners see measurable cooling load reduction after replacing single-pane aluminum with Low-E argon units, particularly on west-facing openings that receive unshaded afternoon sun. Call (561) 354-3861 for a measured survey and projected performance calculation.
Do energy-efficient windows also meet impact requirements in Wellington?
Yes, insulated laminated and certain dual-pane Low-E configurations from PGT and ECO Window Systems carry both ENERGY STAR and Florida Product Approval, satisfying Wellington’s wind zone and most HOA requirements in a single specification. Call (561) 354-3861 to review the certified options.
Impact Garage Doors in Wellington
Impact garage door installation in Wellington is increasingly required as HOAs update covenants to prohibit visible shutter systems on auxiliary structures, and as homeowners recognize that a failed garage door creates a catastrophic pressure point during a wind event. The original non-rated steel or aluminum garage doors in the village’s 1985-2005 homes were never designed for 140 mph loads, and their track hardware has often corroded from humidity and fertilizer-storage proximity in garage configurations common here. Impact Garage Doors through Sightline include wind-load certification and track reinforcement as standard, not as an upsell.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door lacks a wind-load sticker, your HOA has notified you that non-rated doors must be upgraded, or you can visibly flex the panels by hand pressure.
What it costs in Wellington
Hurricane-rated garage door installation in Wellington typically ranges $1,600-$3,800 for a standard two-car opening, including reinforced track, heavy-duty hardware, and Florida Product Approval documentation.
How we do it
We measure the opening and verify the header and jamb framing capacity for wind-load transfer, install the new impact-rated door with reinforced track and heavy-duty rollers, tension the spring system for the increased door weight, and test the auto-reverse and manual release.
Wind-Load Code Compliance
Signs you need it
You’re selling your Wellington home and the buyer’s inspection flagged non-compliant garage doors, or your insurance renewal requires documentation of wind-load rated openings.
What it costs in Wellington
Wind-load code compliance upgrade in Wellington typically ranges $1,200-$2,800 when the existing door can be reinforced with a retrofit kit, or $1,600-$3,800 for full replacement.
How we do it
We assess the existing door and track for retrofit viability, install the appropriate reinforcement kit or specify a full replacement, attach the Florida Product Approval label and documentation, and provide the written certification for your insurance or closing file.
What Impact Garage Doors Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Hurricane-rated garage door (2-car) | $1,600 - $3,800 |
| Wind-load retrofit kit | $1,200 - $2,800 |
| Heavy-duty track and hardware upgrade | $400 - $900 |
Does my garage door need impact rating if it’s not street-facing in Wellington?
Palm Beach County’s wind zone applies to all exterior openings regardless of visibility, and many Wellington HOAs now require uniform appearance without shutters on any structure visible from common areas or neighboring properties. Call (561) 354-3861 to verify your specific covenant requirements.
Will an impact garage door work with my existing opener in Wellington?
Most modern openers handle the increased weight of impact-rated doors, but we verify the opener capacity, spring balance, and auto-reverse sensitivity during installation and adjust or recommend upgrade if the duty cycle is exceeded. Call (561) 354-3861 for an assessment of your current system.
Custom & Geometric Windows in Wellington
Custom and geometric window installation in Wellington serves the architectural specificity of Mediterranean and Spanish-tile elevations in gated communities where HOA review boards reject rectangular stock units in prominent gables, entryways, and stairwells. The original shaped windows in 1985-2005 homes here were typically single-pane with failing seals and corroded frames, and their replacement requires maintaining the exact sightline profile that the architectural covenant was written around. Custom & Geometric Windows from Sightline are measured to the finished opening, not to a standard radius.
Arched & Curved Windows
Signs you need it
Your arched window has visible seal failure at the curved top, the frame has separated at the radius joint, or your HOA requires exact sightline replication for any visible replacement.
What it costs in Wellington
Arched and curved window installation in Wellington typically ranges $1,400-$3,200 per opening, with true radius construction toward the upper end and segmented arch alternatives at lower cost.
How we do it
We template the exact radius and sightline on site, specify the custom unit from PGT or ViewLux with impact-rated laminated glass, verify the rough opening framing matches the template, and install with custom flashing to maintain the stucco profile.
Oversized Openings
Signs you need it
Your great room or stairwell has a window exceeding standard manufacturer sizes, the original unit is a site-built assembly that has leaked for years, or you want to combine multiple openings into a single dramatic glazing wall.
What it costs in Wellington
Oversized custom window installation in Wellington typically ranges $2,500-$6,500 per opening depending on span, structural support requirements, and whether the unit is fixed or operable.
How we do it
We verify header and lateral support capacity with a structural assessment, specify the oversized unit with appropriate reinforcement and glazing, coordinate crane or specialized handling if needed, and install with engineered anchoring and thermal break framing.
What Custom & Geometric Windows Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Arched window (true radius) | $1,800 - $3,200 |
| Arched window (segmented) | $1,400 - $2,400 |
| Oversized opening (custom) | $2,500 - $6,500 |
How do I get HOA approval for custom windows in Wellington?
We provide full-size sightline drawings, product renderings, and finish samples from ViewLux or PGT that match your HOA’s architectural guidelines, with the homeowner submitting to the review board. Call (561) 354-3861 and we’ll coordinate the documentation to your covenant’s exact requirements.
Can you replicate the original arched window shape exactly?
We template the existing radius on site and specify either true radius or segmented construction to match the original sightline within the tolerance your HOA requires, with the template and finished unit photographed for documentation. Call (561) 354-3861 for a site measurement.
Brands We Service in Wellington
We install and service eight verified manufacturer lines in Wellington: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Common hardware, weatherstrip, and glazing components for Wellington’s high-humidity environment are stocked at our South Florida distribution point, with most non-stock parts available in three to five business days. See our brands for full specifications by performance tier.
Pricing for Windows & Doors in Wellington, FL
| Service | Typical range in Wellington |
|---|---|
| Single hung vinyl impact window | $650 - $1,100 |
| Double hung vinyl impact window | $750 - $1,400 |
| 3-panel sliding impact window | $1,200 - $2,400 |
| Hurricane-proof entry door | $1,800 - $4,500 |
| French & double door pair | $2,200 - $5,500 |
| Low-E + argon upgrade | $80 - $180 (add) |
| Insulated laminated impact window | $950 - $2,100 |
| Hurricane-rated garage door (2-car) | $1,600 - $3,800 |
| Wind-load retrofit kit | $1,200 - $2,800 |
| Arched window (true radius) | $1,800 - $3,200 |
| Oversized custom opening | $2,500 - $6,500 |
Prices in Wellington trend toward the upper end of these ranges when HOA architectural review requires specific sightline profiles, custom color matching, or extended-height units for the 10-foot ceilings common in Versailles and Palencia. The written price we provide after measured survey is the price on the final invoice - Haven Clause 1, no surprises.
Neighborhoods We Serve in Wellington
We measure, specify, and install across Wellington’s gated and non-gated communities, with crews dispatched from our South Florida coordination office and routing optimized for same-week scheduling throughout the village.
- Versailles
- Olympia
- Palencia
- Sugar Pond Manor
- Wellington Green
Service Area - Cities Near Wellington
Our crews serve the full Palm Beach County corridor from Wellington, with regular installation schedules in Royal Palm Beach, FL, Lake Worth, FL, Greenacres, FL, and West Palm Beach, FL. Dispatch and scheduling are coordinated from our Miami office, with local crews assigned to each market for familiarity with municipal inspection requirements and HOA processes.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Wellington
Yes, Palm Beach County requires a building permit for all window and door replacements in Wellington’s 140 mph wind zone, with Florida Product Approval documentation submitted for inspection. We pull the permit, schedule the inspection, and provide the passed documentation as part of our standard scope - no additional fee.
Most Wellington gated communities including Versailles and Palencia require architectural review with product data sheets, sightline drawings, and color samples; they prohibit visible shutters, making impact-rated replacement the only compliant path. We prepare the full documentation package for your submission.
We provide free second opinions on any written estimate for Wellington properties, reviewing the specification, measurements, and product approvals against what the opening actually requires. Bring us the competitor’s written quote and we’ll identify any discrepancies at no charge.
Call (561) 354-3861 to schedule your free estimate. Every engagement begins with a measured survey you keep, and the written price before any work starts is the same price on the final invoice.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wellington Customers Say
"Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H.