Custom Window & Door Order Cost - Free Measure, Exact Written Quote

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

How Much Does Custom Window & Door Order Cost in West Palm Beach?

Custom window and door orders in West Palm Beach typically run between $850 and $4,200 per opening, depending on size, glass specification, frame material, and impact rating. Most homeowners in Palm Beach County who are replacing standard openings with custom-sized or impact-rated units land somewhere between $1,100 and $2,800 per unit, with labor and installation adding $180 to $520 per opening on top of product cost. If your project involves geometric shapes, non-standard sightlines, or multi-panel configurations, expect the upper end of that range – or beyond it.

At Sightline Windows & Doors, the written price arrives before any tool is lifted. That is Haven Clause 1: the measured survey we hand you and the final invoice are the same document – no revisions, no surprises after the fact.

Custom Window & Door Order Cost Breakdown (2026)

The table below reflects actual West Palm Beach market pricing as of 2026, drawn from the custom orders Sightline has completed across neighborhoods including El Cid, Northwood, SoSo, Flamingo Park, and the Palm Beach Lakes corridor. These are product-plus-installation ranges for common custom configurations – not list prices from a manufacturer catalog.

What Pushes the Price Up

Three things move a custom order toward the top of any range in this market. First, glass specification: impact-rated laminated glass with a low U-factor and a Solar Heat Gain Coefficient (SHGC) below 0.25 – which is what the Palm Beach County energy code increasingly requires for air-conditioned spaces – costs meaningfully more per square foot than standard tempered lite. Second, frame material: aluminum frames common in South Florida construction cost less to fabricate than reinforced vinyl or fiberglass, but some historic districts in West Palm Beach, including parts of El Cid and Flamingo Park, have appearance standards that push buyers toward finishes that cost more to source. Third, opening geometry: anything that isn’t a rectangle adds fabrication time, lead time, and in most cases a one-piece shipping crate the homeowner pays for.

What Pulls the Price Down

Ordering multiple openings in the same product line from the same manufacturer on the same purchase order almost always yields a better unit cost – fabricators batch-price by square footage of glass cut. If you’re replacing six windows and a sliding door, grouping them as one order through a single line (say, all PGT or all CGI) typically saves $80 to $200 per opening versus ordering piecemeal. Choosing a standard-depth frame profile – even in a non-standard width or height – also cuts fabrication time, which comes back to you in product lead time and occasionally in price.

What Affects Custom Window & Door Order Pricing in West Palm Beach

• Impact rating required by Florida Building Code: West Palm Beach falls within the Palm Beach County high-velocity hurricane zone designation. Any opening within one mile of the coastline, and many inland addresses, requires Miami-Dade Notice of Acceptance (NOA) or Florida Product Approval documentation. Impact-rated glass assemblies cost more to manufacture and ship than non-impact alternatives, and that cost is real – plan for it from the start, not after the permit desk flags the order.
• Opening size and frame depth: Standard residential windows in South Florida typically run 36 by 48 inches or close to it. Custom orders that run taller than 60 inches or wider than 72 inches require thicker frame extrusions and may need a structural buck built into the rough opening – that adds labor. In West Palm Beach’s older stock of 1940s-to-1970s CBS (concrete block and stucco) construction common in Northwood and SoSo, rough openings often read differently on the tape than the original drawings show, which is exactly why Sightline’s measured survey is done before pricing, not after.
• Glass package (U-factor, SHGC, and interlayer): Florida’s energy code sets maximum U-factor and SHGC values for replacement fenestration. Choosing a glass package that exceeds code minimums – lower SHGC for west-facing exposures in West Palm Beach’s afternoon sun, for example – costs more per lite but produces measurably lower cooling loads. Sightline specifies glass by what the orientation requires, not by what is easiest to stock.
• Frame material and finish: Extruded aluminum in a standard Kynar finish is the baseline in this market. Bronze anodize, white powder coat, and custom RAL colors each add a fabrication surcharge that ranges from $40 to $180 per opening depending on manufacturer. Fiberglass frames – available through Therma-Tru and ViewLux – carry a higher material cost but outperform aluminum on thermal bridging in air-conditioned interiors.
• Lead time and expedited fabrication: Standard custom fabrication runs four to ten weeks through most of Sightline’s eight manufacturer lines. If a project has a hard completion date – a closing date, a rental turnover, a code reinspection – some manufacturers offer expedited slots that add a surcharge of 8% to 15% to product cost. West Palm Beach’s building department processing times for window and door permits currently average seven to fourteen business days for residential projects; that timeline is separate from fabrication lead time and affects the overall schedule whether the product is expedited or not.
• Permit and inspection requirements: Palm Beach County requires a building permit for most window and door replacements, including like-for-like replacements when the rough opening is altered. The permit fee itself is modest ($75 to $340 for a typical residential project), but the process requires product approval documentation, a signed and sealed notice of commencement for jobs exceeding certain thresholds, and a final inspection that has to pass before the opening is considered closed out. Sightline handles permit filing as part of every project scope – Haven Clause 1 includes the permit fee as a named line item in the written price, not an after-the-fact add-on.

Before

After

How to Save on Custom Window & Door Order Costs in West Palm Beach

Group Your Openings Into One Order

The single most effective way to reduce per-unit cost on a custom order is to consolidate openings into one purchase order on one manufacturer line. Fabricators price glass by the cut sheet, not by the opening count, so a six-window order cuts proportionally less waste than six single-window orders. If you’re planning to replace windows in phases over two or three years, it’s worth asking whether the full scope can be quoted and ordered together even if installation happens in stages. Sightline can structure the written scope that way – same written price, phased installation schedule.

Choose the Right Product Line for the Application, Not the Most Expensive One

Eight manufacturer lines means eight different performance and price tiers. A fixed picture window on an interior wall that sees no direct weather load does not need the same frame spec as an operable impact casement on a west-facing elevation in West Palm Beach. Sightline’s measured survey identifies which opening gets which spec – not because a less expensive product is better, but because paying for performance you don’t need is waste. CGI and PGT cover the high-end impact-rated tier; CWS and ES Windows fill the mid-range with solid Florida Product Approval documentation; ECO Window Systems and ViewLux address specific residential niches where the performance requirement is clear and the price matters.

Schedule the Measured Survey Before You Budget, Not After

Rough opening dimensions in West Palm Beach’s CBS construction stock frequently differ from what a homeowner measures with a tape from inside. An opening that reads 36 inches at the head may read 34.5 inches at the sill after the stucco return is accounted for. That half-inch difference is the difference between a standard-width product and a custom fabrication. Knowing this before you budget means the written price is accurate on the first pass. Sightline’s measured survey is the written price – the same document – so there is no second round of numbers.

Ask for a Second Opinion on Any Written Estimate You Already Have

Sightline offers a free second opinion on any written estimate from another contractor. This isn’t a promotional add-on; it’s built into how the brand operates. If you’ve received a quote and something in the line items doesn’t read clearly – a product listed without a Florida Product Approval number, a labor figure without a per-opening breakdown, a permit fee listed as “TBD” – bring it in and we’ll review it. Call (561) 354-3861 and ask for the written estimate review. There’s no charge and no obligation.

Understand the Permit Line Item Before Signing Anything

Some contractors in the West Palm Beach market quote product and labor without naming the permit fee until the contract is signed. Under Haven Clause 1, Sightline’s written price names every line item – product, labor, permit, and any structural work to the rough opening – before the survey appointment ends. If a quote you’ve received doesn’t show the permit as a named dollar amount, ask for it in writing before you proceed. A permit omitted from the quote is a cost that appears later, and in Palm Beach County’s inspection environment, skipping the permit entirely is not a viable workaround for impact-rated work.

Time Your Order Around Manufacturer Lead Times, Not Installation Urgency

Expedited fabrication slots cost real money – typically 8% to 15% above standard product pricing. If your project doesn’t have a hard deadline driven by a closing or a code reinspection, ordering on a standard lead time saves that surcharge. Sightline will give you the lead time for each product line in writing at the time of the measured survey so you can plan the installation schedule without paying the expedited premium unnecessarily. For projects in West Palm Beach where the permit processing adds seven to fourteen business days before installation can begin anyway, there is often no practical benefit to expediting the product if the permit timeline is the constraint.

FAQs: Custom Window & Door Order Cost in West Palm Beach

How much does a custom impact window cost in West Palm Beach in 2026?

A custom impact window in West Palm Beach costs between $850 and $2,100 per opening installed, depending on size, glass package, and manufacturer line. A non-standard-size single-hung unit in PGT or CGI at a standard residential dimension runs toward the lower end of that range; a large fixed picture window with a low-SHGC glass package and a custom frame finish runs toward the upper end. Call (561) 354-3861 for a written price specific to your openings – the measured survey and the quote are the same document, so the number you get is the number on the invoice.

Do custom windows cost more than standard sizes?

Yes, in most cases by 15% to 35% over an equivalent standard-size unit from the same manufacturer. The cost difference comes from fabrication setup – cutting glass lites and frame extrusions to non-catalog dimensions adds both material waste and labor at the factory. That said, in West Palm Beach’s older CBS housing stock, where rough opening dimensions frequently don’t match any catalog standard, custom sizing is often the only accurate option. A standard window ordered slightly small and shimmed to fit is not a proper installation under Florida Building Code or under Sightline’s Haven Standard.

What permits are required for custom window and door replacement in West Palm Beach?

Palm Beach County requires a building permit for most window and door replacements, including custom-sized units and like-for-like replacements when the rough opening is modified. The permit requires Florida Product Approval documentation for the specific unit being installed, and a final inspection must pass before the job is closed out. Permit fees for residential projects in West Palm Beach typically range from $75 to $340. Sightline files permits as part of every project scope and lists the permit fee as a named line item in the written price from the start.

How long does a custom window or door order take in West Palm Beach?

Standard custom fabrication through Sightline’s manufacturer lines runs four to ten weeks from order placement to delivery, depending on the product line and current factory schedules. Add seven to fourteen business days for West Palm Beach building department permit processing, which typically runs concurrently with fabrication but cannot be assumed to overlap perfectly. Expedited fabrication slots are available from some manufacturers at an 8% to 15% surcharge. The measured survey appointment will give you a specific lead time estimate for your chosen product line in writing.

Is it cheaper to replace all windows at once or one at a time in West Palm Beach?

Replacing all windows at once is typically $80 to $200 per opening cheaper than replacing them one at a time, for two reasons: manufacturers batch-price glass cuts on larger orders, and mobilization costs (crew travel, permit filing, equipment setup) are spread across more openings in a single project. If budget doesn’t allow for a full-house replacement in one phase, Sightline can quote the entire scope upfront as one written price and structure a phased installation schedule – so you lock in the grouped pricing without committing to a single installation date for every opening.

Key Takeaways

• Custom window and door orders in West Palm Beach run $850 to $5,500 per opening installed, depending on product type, impact rating, glass spec, and frame finish.
• Impact rating is not optional for most West Palm Beach addresses – Florida Building Code and Palm Beach County’s wind zone requirements govern which products can be permitted.
• Grouping multiple openings into one manufacturer order typically saves $80 to $200 per opening versus piecemeal replacement.
• Standard custom fabrication takes four to ten weeks; add seven to fourteen business days for permit processing in West Palm Beach.
• Permit fees ($75 to $340) should appear as a named line item in any written estimate – not as a “TBD” or verbal assurance.
• Sightline’s measured survey and the final invoice are the same document. The number doesn’t change between the appointment and the project start.
• The 365-Day Done Right Promise is written into every job under the Haven Standard – not offered case by case.

Why West Palm Beach Homeowners Use Sightline for Custom Orders

Custom window and door work in West Palm Beach carries specific risks that don’t apply in other Florida markets. The city’s building stock is unusually mixed: mid-century CBS construction in Northwood and SoSo sits alongside 1980s timber-frame in the Lakes District and newer concrete construction near the waterfront. Each structural type reads differently during a measured survey, and each one affects how a custom unit is framed, set, and sealed. Sightline’s background-checked, uniformed crews have worked across all of these construction types since 2012, and the photo documentation left at every job visit means there is a record of what was found at rough opening inspection – not just what was installed.

The Haven Standard governs every engagement: Have it in writing (Clause 1 – the written price before any work), Arrive on schedule (Clause 2), Verified crews (Clause 3 – license numbers on record before the crew arrives), Evidence on every job (Clause 4 – the documented photo record), and No surprises (Clause 5 – the invoice matches the survey). On a custom order, where lead times, permit timelines, and fabrication specifications all have to track together, that structure matters more than it does on a standard replacement job.

Sightline draws from eight manufacturer lines – PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux – specified by what each opening requires. If you’ve been given a quote that lists a product without a Florida Product Approval number, or a labor figure without a per-opening breakdown, bring it to us. The free second-opinion review has no obligation attached to it, and it takes one conversation to tell you whether the number you have is accurate for the West Palm Beach market.

Sonia Raman leads the Sightline team in West Palm Beach, and the documented pricing discipline the brand is built on has been in place since 2012 – across more than 18,000 openings, every one with a written price before the first measurement was marked on the wall.

To get a written price for your custom window or door order in West Palm Beach, call (561) 354-3861. The measured survey is where the price is set, and the price doesn’t change between that conversation and the day the crew arrives. That’s Haven Clause 1, and it applies to every job Sightline takes.

You can also learn more about Sightline Windows & Doors and how the Haven Standard structures every engagement from first contact to final inspection.

Written by Sonia Raman, Owner at Sightline Windows & Doors, serving West Palm Beach since 2012. Pricing reflects the West Palm Beach market as of 2026. Sightline Windows & Doors West Palm Beach offers free estimates – call (561) 354-3861.