Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterPGT Custom & Geometric Windows in West Palm Beach: What to Know First
We install and service PGT custom and geometric windows in West Palm Beach as an independent PGT service provider - not affiliated with or authorized by PGT. Most geometric and shaped-window jobs we measure in West Palm Beach run between $1,800 and $4,500 per opening, depending on whether we’re matching an existing PGT impact-rated unit or engineering a new configuration. Our measured survey and written quote are the same document; if the number isn’t on the page, it isn’t in the price.
This page is for homeowners in West Palm Beach who own a PGT window with a non-rectangular opening - arched, circular, trapezoidal, or oversized - and need someone who understands how PGT builds these units differently than their standard rectangles. Call (561) 354-3861 to schedule your free estimate.
How PGT Products Fail - and How We Fix Them
- WinGuard Architectural Series (AW5500) - seal failure in arched tops. The thermal break in PGT’s aluminum-clad geometric frames can separate at the radius point where the extrusion is stressed during forming. We see this most often on south- and west-facing elevations in West Palm Beach, where daily expansion cycles exceed what the original sealant was specified for. We remove the sash, re-bed the glass with a structural silicone rated for the actual frame temperature, and document the repair with before-and-after photos.
- WinGuard Vinyl (Winguard 700/800 series) - corner delamination in custom angles. PGT’s vinyl welding process leaves a slightly different molecular structure at mitered corners than at factory defaults. On geometric jobs where the factory angle is cut and re-welded, we’ve found corner separation starting at year seven in coastal West Palm Beach installations. We order factory-original corner keys when available, or machine our own from PGT-specified PVC compound when the line has been discontinued.
- PGT PremierVue oversized units - operator hardware misalignment. Custom heights over 72 inches put lateral load on PGT’s standard roto-gear operators that the catalog doesn’t acknowledge. The sash drifts open or the crank strips. We spec upgraded Truth Hardware or Truth Entegra operators with a higher torque rating, and we shim the mounting block to transfer load to the frame instead of the sash rail.
- PGT Architectural impact-rated geometric - laminated glass edge exposure. In circular and half-round units, the exposed glass edge sits closer to the frame perimeter than in rectangular units. Salt air and pressure washing in West Palm Beach homes - especially along Flagler Drive and the Intracoastal - degrades the PVB interlayer at the edge. We replace with SentryGlas or re-specify the unit with a recessed glazing bead that PGT offers but rarely defaults to.
- PGT Custom 4400 series - anodized finish chalking on radius frames. The anodizing bath behaves differently on curved extrusions, and we’ve documented premature oxidation on geometric units installed 2015-2019. We don’t touch up anodized aluminum - it never matches - but we can source factory-matched replacement frames or, for painted finishes, apply a Kynar 500 re-coat that carries its own 10-year film integrity warranty.
Our PGT Custom & Geometric Windows Process
- 1
Measured survey. Sonia Raman or a senior tech records every radius, chord length, and rough opening dimension. You keep the sketch; we keep the CAD file. The measurement and the quote are the same document.
- 2
Parts diagnosis: OEM vs. quality aftermarket. We check PGT factory availability first. For discontinued geometric profiles, we machine or source from PGT’s original extrusion dies where possible. We note every substitution in writing before ordering.
- 3
Written scope and price. Haven Clause 1: the quote lists every part, every labor hour, and every exclusion. No change orders without a second signed document.
- 4
Installation by verified crew. Haven Clause 3: background-checked, uniformed technicians with license numbers provided before arrival. The lead tech on your job has handled PGT geometric units before - we don’t train on your opening.
- 5
Testing and documentation. We operate every moving part, check sightlines for square, and photograph the completed work. You receive the photo record and the 365-Day Done Right Promise in writing.
- 6
Cleanup and final invoice. The invoice matches the quote. If it doesn’t, we eat the difference.
Before
AfterWhat PGT Custom & Geometric Windows Costs in West Palm Beach
These are the ranges we write on our quotes for PGT geometric and custom work in West Palm Beach. Your measured survey determines the exact figure.
| Scenario | Typical Range |
|---|---|
| Standard geometric replacement (arched, half-round, quarter-round), impact-rated, existing frame intact | $1,800 - $2,800 |
| Custom angle or trapezoidal unit, vinyl frame, new construction or full-frame replacement | $2,400 - $3,600 |
| Oversized PGT PremierVue or Architectural unit, 72″+ height, upgraded hardware | $3,200 - $4,500 |
| Laminated glass replacement only, geometric sash, standard annealed or heat-strengthened | $890 - $1,400 |
| Frame repair or corner re-weld on existing PGT geometric unit | $650 - $1,100 |
What moves the price: whether the original PGT profile is still extruded; whether the opening requires structural reinforcement for impact rating; whether we need to match a discontinued finish. We don’t guess. Call (561) 354-3861 for your free estimate - we’ll measure, write the price, and let you decide.
Why West Palm Beach Homeowners Call Sightline Windows & Doors West Palm Beach for PGT Work
We’ve installed and serviced PGT, CGI, CWS, ES Windows, and ECO Window Systems across West Palm Beach since 2012. That multi-brand fluency matters when your PGT geometric profile has been discontinued and we need to engineer a compatible solution - or when you want a second opinion on whether another brand’s custom line fits your opening better.
Every job is governed by the Haven Standard: written price before work starts (Haven Clause 1), verified crews with license numbers (Haven Clause 3), and evidence on every visit through our documented photo record. The 365-Day Done Right Promise is stamped on every invoice, not offered as a courtesy. If we miss a tolerance or a finish match, we make it right.
Our crews work regularly along Flagler Drive, in the South End, and throughout the surrounding West Palm Beach neighborhoods. Sonia Raman reviews every geometric quote personally - she learned the trade at Los Angeles Trade-Technical College, spent two years studying frame systems and glazing tolerances, and has spent the better part of fifteen years catching clearance problems before they become change orders.
FAQs
PGT’s original warranty covers manufacturing defects, not field modifications or third-party repairs. As an independent PGT service provider, we document every part we use and every procedure we follow so you have a complete record if a manufacturing claim ever arises. Our 365-Day Done Right Promise covers our workmanship separately. Call (561) 354-3861 if you’d like us to review your warranty status before we start.
Factory-original PGT geometric frames and sashes typically ship in 4-6 weeks if the profile is still active. Discontinued lines may take 8-12 weeks or require us to machine from existing extrusion stock. We tell you the lead time in writing before you sign, and we don’t collect a deposit until you know the schedule. Call (561) 354-3861 for current availability on your specific PGT series.
If the frame is square, the hardware operates smoothly, and the insulated glass unit has simply failed - fog between panes, broken seal - we can often replace just the glass pack for roughly 40% of full-unit cost. If the frame is delaminating, the operator is stripped, or the geometric shape requires a new sash extrusion, replacement is the sounder investment. We measure both scenarios and write you two prices. Call (561) 354-3861 for the comparison.
Yes, when the job requires it. West Palm Beach requires permits for any impact-rated window replacement that changes the opening dimensions or the structural attachment. We pull the permit, schedule the inspection, and pass it - included in our written scope, never added later. Non-impact decorative geometric replacements in existing openings sometimes don’t require permitting; we tell you which category your job falls into at the estimate. Call (561) 354-3861 to confirm.
PGT’s “custom” typically means size and finish variations within a standard rectangular frame. “Geometric” means non-rectangular shapes - arches, circles, trapezoids, octagons - which use different extrusion bending, welding, and glazing processes. We’ve found that PGT’s geometric warranty terms differ slightly from standard custom, and that the failure modes (seal stress at radius points, corner delamination) are distinct. We specify which category your unit falls into before quoting. Call (561) 354-3861 for a precise assessment of your opening.
Ready to get the exact price for your PGT custom or geometric window in West Palm Beach? Call (561) 354-3861 to schedule your free measured survey and written estimate. You’ll receive the same document we work from - no surprises, no change orders, no number that isn’t on the page.
Written by Sonia Raman, Owner, Sightline Windows & Doors West Palm Beach at Sightline Windows & Doors West Palm Beach, serving West Palm Beach and nearby areas.