Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Wellington
Impact window and door replacement in Wellington typically runs $650-$1,400 per opening for standard vinyl or aluminum impact-rated units, with full-home changeouts on a 2,500-square-foot CBS home averaging $18,000-$34,000 depending on product tier and opening count. Most Wellington projects require 8-14 weeks from measured survey to final inspection, with architectural review in gated communities adding 3-6 weeks to the front end. Call (561) 354-3861 to schedule your free measured survey; we’ll hand you the written price before any work starts.
We serve Wellington from our South Florida dispatch office, with crews working the village’s gated neighborhoods and equestrian properties weekly. Our technicians know the CBS rough-opening standards common to homes built here between 1985 and 2005, and we file architectural submittal packets for HOAs including Versailles, Olympia, and Palencia as standard practice. That local fluency matters because Wellington’s combination of strict aesthetic codes and Palm Beach County’s 140+ mph wind zone leaves no room for guesswork on product selection or sizing.
Why Sightline Windows & Doors West Palm Beach Is Wellington’s Preferred Impact Windows & Doors Company
Sightline has completed thousands of installations across Palm Beach County since 2012, and Wellington’s specific conditions-pre-Andrew housing stock, HOA-governed architecture, and inland hurricane exposure-represent a significant share of that work. Our Impact Windows & Doors in Wellington customers receive the same documented process that governs every opening under the Haven Standard: a measured survey you keep, a written price that cannot change, and a photo record of the completed job.
We do not send salespeople to measure. Our technicians arrive uniformed, background-checked, and identified by license number, carrying the tools to take frame readings, sightline measurements, and glazing specifications on the first visit. That matters in Wellington, where out-of-area contractors unfamiliar with local CBS framing standards routinely mis-size replacement impact sliders, leading to water intrusion and failed inspections. Our crews have corrected those errors on homes near Wellington’s equestrian district and along Forest Hill Boulevard.
Live phone coverage is available 24/7. The person who answers can schedule your measured survey, explain our product lines by performance tier and price range, and connect you directly with our permitting coordinator if your property falls under architectural review.
Our Impact Windows & Doors Services in Wellington
Hurricane Impact Windows
Wellington sits roughly 15 miles inland, but Palm Beach County’s 140+ mph design wind zone means every replacement must meet Florida Product Approval standards for HVHZ (High Velocity Hurricane Zone) compliance. Our hurricane impact windows are specified by wind-load requirement, not by what is in stock. For Wellington’s Mediterranean and Spanish-tile homes, we typically specify PGT or CGI impact-rated vinyl or aluminum frames with laminated glass interlayers that remain intact even if struck by wind-borne debris. The homeowner receives Florida Product Approval numbers for every unit, documented in the photo record and required for both final inspection and wind mitigation credit applications.
Horizontal Roller & Sliding Impact Windows
The sliding glass door is the single most common replacement job in Wellington, and for specific reasons. Homes here almost universally feature large sliders opening onto screened pool enclosures-a high-exposure configuration that demands oversized impact-rated units. The original single-pane aluminum sliders in pre-1993 homes throughout Wellington have steel hardware that corrodes shut from years of humidity and pool-chemical exposure. We recently completed a full impact window and door replacement in Versailles on a 1994 CBS home with exactly this failure mode. After submitting the architectural packet-showing PGT impact-rated glazing with a laminated glass interlayer, bronze frames matching the HOA palette, and Florida Product Approval documentation-we scheduled the tear-out and install in one continuous push once approval cleared, avoiding a half-finished facade. The homeowner also qualified for wind mitigation credits under Florida Statute 627.0629 because every opening received impact glass.
Single Hung Impact Windows
Single hung impact windows-where the bottom sash moves and the top sash is fixed-are the standard replacement for Wellington’s original aluminum single-pane windows, particularly in bedrooms and secondary facades where operable area is limited by code. We specify U-factor and SHGC ratings appropriate to Wellington’s intense summer heat and afternoon thunderstorm cycles, which accelerate seal failure on inferior products. ES Windows and ECO Window Systems both manufacture single hung units in our mid-tier range that perform well in this climate, with thermal breaks that reduce frame condensation during humid months.
Double Hung Impact Windows
Double hung impact windows, with both sashes operable, suit Wellington’s second-story installations and homes where cleaning access from inside is preferred. The tilt-in feature matters for homes near Wellington’s green spaces and polo grounds, where pollen and dust accumulation is higher than in denser urban areas. We size these to existing rough openings without the structural modifications that out-of-area contractors sometimes propose, keeping the scope-and the written price-tight.
Wind Mitigation & HVHZ Code Compliance
Every impact window and door we install in Wellington is documented for wind mitigation inspection, with Florida Product Approval numbers, installation method, and photo evidence compiled into a packet the homeowner can submit to their insurance carrier. Under Florida Statute 627.0629, verified impact-rated openings qualify for premium discounts. We complete the wind mitigation form as part of our closing documentation; you do not need to hire a separate inspector.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Wellington
We specify from eight manufacturer lines-PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux-selected by what the opening requires, not by margin. For Wellington’s HOA-governed neighborhoods, that means we can match existing frame colors and profiles from documented manufacturer palettes rather than forcing a compromise. Mr-Glass and Therma-Tru both offer impact-rated entry door systems with fiberglass or steel slabs that satisfy architectural review boards concerned with street-facing aesthetics. ES Windows manufactures aluminum impact frames in custom colors that have cleared review in Versailles and Palencia. We do not stock inventory in a warehouse; we order to specification after approval, which eliminates the “close enough” substitution that derails HOA submittals.
Common Impact Windows & Doors Problems We See in Wellington Homes
- Corroded slider hardware from pool-chemical exposure. Original single-pane aluminum sliding glass doors in Wellington’s older sections-built right around the Andrew era-have steel rollers and locks that seize after years of chlorine and humidity exposure. The door will not open, or it opens with force that risks breaking the glass. This is a replacement job, not a repair; the hardware is obsolete and the frame is not impact-rated.
- Failed seals and fogged glazing on original single-pane units. Wellington’s intense summer humidity and afternoon thunderstorm cycles accelerate seal degradation on non-impact windows. Once the desiccant inside an insulated unit is saturated, the glass fogs permanently. On pre-1993 homes, this usually means the entire window is due for impact-rated replacement.
- HOA rejection of accordion or panel shutters on street-facing facades. In Wellington’s gated villages, architectural review boards routinely prohibit visible shutter hardware. Homeowners who install shutters without approval face removal orders. Full impact window and door replacement is the only compliant path that satisfies both the HOA and Palm Beach County’s wind-load code.
- Mis-sized replacements from out-of-area contractors unfamiliar with CBS standards. Wellington’s concrete block stucco construction uses rough-opening dimensions and fastening patterns that differ from frame or wood construction. Contractors who measure the sash rather than the block opening order units that sit proud of the stucco or require destructive trimming, leading to water intrusion and inspection failure.
Pricing for Impact Windows & Doors in Wellington, FL
These are the price ranges we write on our measured surveys for Wellington properties in 2025. The quote you receive is the same document; the price does not change once work starts.
| Service | Typical Range in Wellington |
|---|---|
| Single hung impact window (standard opening) | $650-$950 |
| Double hung impact window (standard opening) | $780-$1,150 |
| Horizontal roller impact window | $820-$1,200 |
| Sliding glass impact door (standard 6′ or 8′) | $2,400-$4,200 |
| Impact entry door system (fiberglass or steel) | $3,200-$5,800 |
| Full-home changeout, 2,500 sq ft CBS home | $18,000-$34,000 |
| Architectural submittal packet (HOA filing) | Included |
| Wind mitigation documentation | Included |
What moves a project within these ranges: product tier (vinyl vs. aluminum vs. aluminum-clad wood), glass package (laminated vs. insulated laminated), opening size and count, and whether the existing frame is nail-fin or block-mount. We do not estimate over the phone. The measured survey takes 45-90 minutes; you keep the document, and we email the written scope and price within 24 hours. Bring us a competitor’s written estimate and we will review it at no charge.
We Also Serve Cities Near Wellington
Our Impact Windows & Doors crews work throughout central Palm Beach County, including Royal Palm Beach, Lake Worth, Greenacres, and West Palm Beach. Each city has distinct housing stock and code requirements; our measured survey and product specification process adapts to local conditions rather than applying a template.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Wellington
Architectural review in Wellington’s gated communities typically adds 3-6 weeks to the project timeline. We file the submittal packet on your behalf, including product approval numbers, color samples, and elevation drawings, and we do not schedule tear-out until written approval is received. This prevents the half-finished facade that occurs when contractors mobilize prematurely. Call (561) 354-3861 to discuss your property’s specific HOA requirements; estimates are free.
Most Wellington HOAs, including those in Versailles, Olympia, and Palencia, prohibit accordion or panel shutters on street-facing facades. The architectural covenants prioritize uniform aesthetics, and visible shutter hardware is routinely rejected. Full impact window and door replacement is the compliant alternative that satisfies both the HOA and Palm Beach County’s 140+ mph wind-load code. We verify your specific covenants during the measured survey and specify products from approved manufacturer palettes.
The original single-pane aluminum sliders in Wellington’s pre-1993 homes use steel rollers, tracks, and locking hardware that corrodes from the combination of South Florida humidity and chlorine exposure from nearby pool enclosures. Once corrosion progresses, the door cannot be repaired with new hardware; the frame itself is obsolete and not impact-rated. Replacement with a modern impact-rated sliding door system is the only permanent solution. We encounter this failure mode constantly in Wellington’s older sections.
Yes. Under Florida Statute 627.0629, verified impact-rated openings qualify for wind mitigation premium discounts. We document every installation with Florida Product Approval numbers, installation method, and photo evidence, compiling the packet your insurance carrier requires. The discount varies by carrier and policy; we do not guarantee a specific dollar amount, but we guarantee the documentation will be complete and accurate. Call (561) 354-3861 to schedule installation that qualifies.
Impact windows with low-E coatings and insulated laminated glass typically reduce solar heat gain compared to original single-pane aluminum windows, which are still common in Wellington’s pre-1993 housing stock. The improvement is measurable in reduced HVAC runtime during summer afternoons, when Wellington’s thunderstorm cycles and high humidity place maximum load on cooling systems. We specify U-factor and SHGC ratings appropriate to your home’s orientation and shading; the measured survey includes a glazing recommendation by exposure.
Call (561) 354-3861 to schedule your free measured survey. We’ll take frame readings and sightline measurements, explain our product lines by performance tier and price range, and hand you a written price before any work starts. Every job is covered by our 365-Day Done Right Promise, stamped under the Haven Standard.
Written by Sonia Raman, Owner at Sightline Windows & Doors West Palm Beach, serving Wellington since 2012 under the Haven Standard.